Dell Vostro 5502 Service Manual - Page 39
System fan, Removing the system fan
![]() |
View all Dell Vostro 5502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Steps 1. Place the heat sink on the system board and align the screw holes on the heat sink with the screw holes on the system board. 2. In sequential order (as indicated on the heat sink), tighten the four captive screws (M2x3) that secure the heat sink to the system board. Next steps 1. Install the system fan. 2. Install the battery. 3. Install the base cover. 4. Follow the procedure in after working inside your computer. System fan Removing the system fan Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the base cover. 3. Remove the battery. About this task The figure indicates the location of the system fan and provides a visual representation of the removal procedure. Disassembly and reassembly 39
![](/manual_guide/products/dell-vostro-5502-service-manual-1b04184/39.png)