Dell Vostro 5502 Service Manual - Page 29
Installing the M.2 2230 solid-state drive - SSD-2
![]() |
View all Dell Vostro 5502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Steps 1. Remove the single screw (M2x3) that secures the solid-state drive to the palm-rest and keyboard assembly. 2. Slide and remove the solid-state drive module from the solid-state drive slot on the system board. Installing the M.2 2230 solid-state drive - SSD-2 Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. NOTE: Depending on the configuration ordered, your computer may support a 2230 solid-state drive or a 2280 solid-state drive in M.2 slot one. NOTE: M.2 slot two supports one PCIe Gen3 x4 NVMe or SATA solid-state drive (M.2 2230 or M.2 2280) or one Intel Optane memory H10 with solid state storage. NOTE: If there is only one solid-state drive in the configuration you ordered, you can install another solid-state drive in the other M.2 slot. However, you may need a solid-state drive bracket (sold separately) to install the additional solid-state drive. About this task The figure indicates the location of the solid-state drive bracket and provides a visual representation of the bracket alignment procedure to accommodate the M.2 2230 solid-state drive from slot two. Disassembly and reassembly 29
![](/manual_guide/products/dell-vostro-5502-service-manual-1b04184/29.png)