Dell W-7024 Controller Installation Guide - Page 10

The following table lists the different components of the W-7024 controller: Table 4: W-7024 Controller Components Component Description Access ports 24 x 10/100/1000BASE-T PoE/PoE+ Ethernet ports Uplink ports 2 x 10GBASE-X ports Management port Allows connection to a separate management network Power, Status, and Peered LED Provides basic monitoring of the controller LCD Allows configuration of LCD behavior and other basic operations Enter button Allows execution of actions on the LCD Screen Menu button Allows selection of the LCD screen menu USB interface Allows uploading configuration and image from a USB 2.0 storage device. Serial Console port RJ-45 serial console access port for direct local management Micro-USB console port Micro-USB console access port for direct local management AC in AC power connector Grounding points Provided for attaching the grounding Page 10 11 13 13 14 16 16 17 17 17 Access Ports The W-7024 controller is equipped with twenty-four 10/100/1000BASE-T Gigabit Ethernet (RJ-45) ports. These port are labeled from 0 to 23. Gigabit Ethernet uses all eight wires and each pair is bi-directional, which means, the same pair is used for both data transmission and data reception. Figure 3 illustrates the Gigabit Ethernet port pinout for an RJ-45 connector. The pins paired on a 10/100/1000BASE-T Gigabit Ethernet port are: 1/2, 3/6, 4/5, and 7/8. All Power over Ethernet (PoE) capable ports support IEEE 802.3af PoE, providing up to 15.4 W of DC power, and IEEE 802.3at Power over Ethernet Plus (PoE+), supplying up to 30.0 W of DC power to connected devices, but the power per port is subject to the total PoE power available in the chassis. Figure 3: 10/100/1000BASE-T Port Pin Out Access Port LEDs Each 10/100/1000BASE-T Gigabit Ethernet port is equipped two LEDs that allow basic monitoring of status, activity, and configuration of the port. Dell Networking W-7024 Controller | Installation Guide W-7024 Controller | 10