Dell W-7024 Controller Installation Guide - Page 22

Table or Shelf Installation, Required Tools and Equipment, Installation Steps, Wall Mounting

Page 22 highlights

Figure 10: Mid-Mount Rack Installation NOTE: Leave a minimum of 10 cm (4 inches) of space on the left and right side of the controller for proper air flow and ventilation. Leave additional space in the front and the back of the controller to access network cables, LED status indicators, and power cord. Table or Shelf Installation Required Tools and Equipment l Rubber feet Installation Steps 1. Attach the rubber feet to the bottom of the controller (see Figure 11). 2. Place the controller on the desired flat table or shelf. Figure 11: Attaching Rubber Feet Wall Mounting An optional accessory kit (SPR-WL2-MNT, must be purchased separately) allows mounting the W-7024 controller to a wall. Dell Networking W-7024 Controller | Installation Guide Installation | 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

Figure 10:
Mid-Mount Rack Installation
NOTE:
Leave a minimum of 10 cm (4 inches) of space on the left and right side of the controller for proper air flow and ventilation.
Leave additional space in the front and the back of the controller to access network cables, LED status indicators, and power cord.
Table or Shelf Installation
Required Tools and Equipment
l
Rubber feet
Installation Steps
1.
Attach the rubber feet to the bottom of the controller (see
Figure 11
).
2.
Place the controller on the desired flat table or shelf.
Figure 11:
Attaching Rubber Feet
Wall Mounting
An optional accessory kit (SPR-WL2-MNT, must be purchased separately) allows mounting the W-7024 controller
to a wall.
Dell Networking W-7024 Controller |
Installation Guide
Installation | 22