Dell W-Series 324 Instant 6.5.1.0-4.3.1.0 User Guide - Page 352

Backing up and Restoring W-IAP Configuration Data You can back up the W-IAP configuration data and restore the configuration when required. Viewing Current Configuration To view the current configuration on the W-IAP: l In the UI, navigate to Maintenance > Configuration > Current Configuration. l In the CLI, enter the following command at the command prompt: (Instant AP)# show running-config Backing up Configuration Data To back up the W-IAP configuration data: 1. Navigate to the Maintenance > Configuration page. 2. Click Backup Configuration. 3. Click Continue to confirm the backup. The instant.cfg containing the W-IAP configuration data is saved in your local file system. 4. To view the configuration that is backed up by the W-IAP, enter the following command at the command prompt: (Instant AP)# show backup-config Restoring Configuration To restore configuration: 1. Navigate to the Maintenance > Configuration page. 2. Click Restore Configuration. 3. Click Browse to browse your local system and select the configuration file. 4. Click Restore Now. 5. Click Restore Configuration to confirm restoration. The configuration is restored and the W-IAP reboots to load the new configuration. (Instant AP)(config)# copy config tftp://x.x.x.x/confgi.cfg 352 | W-IAP Maintenance Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide