Dell W-Series 324 Instant 6.5.1.0-4.3.1.0 User Guide - Page 404
Failover, Distributed, L3 profile with VLAN 30
View all Dell W-Series 324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 404 highlights
l 10.40.0.0/16 subnet is reserved for L3 mode -used by Contractor SSID. l 172.16.20.0/24 subnet is used for NAT mode - used for wired network. l Client count in each branch is 200. l Contractors are only permitted to reach 10.16.0.0/16 network. W-IAP Configuration This section provides information on configuration steps performed through the CLI and the UI. Table 86: W-IAP Configuration for Scenario 3-IPsec: Multiple Datacenter Deployment Configuration Steps CLI Commands 1. Configure the primary IP address. This IP address is the Public IP address of the controller. Fast Failover is enabled for fast convergence. (Instant AP)(config)# vpn primary (Instant AP)(config)# vpn backup (Instant AP)(config)# vpn preemption (Instant AP)(config)# vpn fast-failover UI Procedure See Configuring an IPsec Tunnel 2. Configure routing profiles to tunnel traffic through IPsec. (Instant AP)(config)# routing-profile (Instant AP)(routing-profile)# route 0.0.0.0 0.0.0.0 (Instant AP)(routing-profile)# route 10.0.0.0 255.0.0.0 See Configuring Routing Profiles 3. Configure Enterprise DNS for split DNS. The example in the next column uses a specific enterprise domain to tunnel all DNS queries matching that domain to corporate. (Instant AP)(config)# internal-domains (Instant AP)(domains)# domain-name corpdomain.com See Configuring Enterprise Domains 4. Configure Distributed, L3 DHCP profiles with VLAN 30 and VLAN 40. Distributed, L3 profile with VLAN 30 (Instant AP)(config)# ip dhcp l3-dhcp (Instant AP)(DHCP profile "l3-dhcp")# server-type Distributed,L3 (Instant AP)(DHCP profile "l3-dhcp")# server-vlan 30 (Instant AP)(DHCP profile "l3-dhcp")# ip-range 10.30.0.0 10.30.255.255 (Instant AP)(DHCP profile "l3-dhcp")# dns-server 10.1.1.50,10.1.1.30 (Instant AP)(DHCP profile "l3-dhcp")# domain-name corpdomain.com (Instant AP)(DHCP profile "l3-dhcp")# client-count 200 Distributed, L3 profile with VLAN 40 (Instant AP)(config)# ip dhcp l3-dhcp (Instant AP)(DHCP profile "l3-dhcp")# server-type Distributed,L3 (Instant AP)(DHCP profile "l3-dhcp")# server-vlan 40 (Instant AP)(DHCP profile "l3-dhcp")# ip-range 10.40.0.0 10.40.255.255 (Instant AP)(DHCP profile "l3-dhcp")# dns-server 10.1.1.50,10.1.1.30 See Configuring Distributed DHCP Scopes and Configuring Local DHCP Scopes Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide IAP-VPN Deployment Scenarios | 404