Dell W-Series 324 Instant 6.5.1.0-4.3.1.0 User Guide - Page 398
W-IAP-Connected Switch Configuration, Datacenter Configuration
View all Dell W-Series 324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 398 highlights
Table 84: W-IAP Configuration for Scenario 1-IPsec: Single Datacenter Deployment with No Redundancy Configuration Steps CLI Commands UI Procedure (Instant AP)(Access Rule "wireless-ssid")# rule any any match any any any permit NOTE: Ensure that you execute the commit apply command in the Instant CLI before saving the configuration and propagating changes across the W-IAP cluster. W-IAP-Connected Switch Configuration Client VLANs defined in this example must be opened on the upstream switches in multiple W-IAP deployments, as client traffic from the slave to the master is tagged with the client VLAN. Datacenter Configuration For information on controller configuration, see Configuring a Controller for IAP-VPN Operations on page 243. Ensure that the upstream router is configured with a static route pointing to the controller for the L3 VLAN. Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide IAP-VPN Deployment Scenarios | 398