Dell Wyse 3020 Wyse ThinOS Version 8.5 INI Reference Guide - Page 28
NoSessionTimer, LockTimer, VNCD_8bits, VNCD_Zlib, Connection Settings: wnos.ini, username} INI
View all Dell Wyse 3020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
INACTIVE=minutes [NoSessionTimer=minutes] [LockTimer=seconds] LongApplicationName={no, yes} MaxVNCD={0, 1} [VNCD_8bits={yes,no}] [VNCD_Zlib={yes, no}] MMRConfig={VIDEO} [flashingHW={0, 1}] Multifarm={no, yes} 28 Parameters for wnos INI files only Default is 0. There is no Idle timeout. The range is 0 minutes to 480 minutes.If the value given is bigger than 480, 480 is set instead. If the value given is smaller than 0, 0 is set instead. When the system idle is time out in the configured minutes, the system will automatically sign off, reboot or shutdown which are based on the setting of AutoSignoff. NoSessionTimer- The parameter NoSessionTimer has the same range as INACTIVE and it is valid only if INACTIVE value is not 0. If there is a session use the value of Inactive, otherwise use the value of NoSessionTimer, if NoSessionTimer is configured. If AutoSignoff=yes Shutdown=yes is configured, then this statement can work before signon. If AutoSignoff=yes Reboot=yes is configured, this statement can work before signon. LockTimer-If the parameter LockTimer is set, the terminal is locked and the system idle is timeout in the configured seconds; System will automatically sign off, reboot or shutdown based on the setting of AutoSignoff. Default is no. Yes/no option to display all 38 characters in a desktop icon name. If LongApplicationName=no, then icons will display up to 19 characters; any over 19 characters and the last three characters will be "...". Default is 0. Option to enable VNC shadowing. Default value is 0 means VNC shadowing is disabled. Set to 1 to enable shadowing. NOTE: Only one VNC client session is allowed and a password is required. See also VNCPrompt in Connection Settings: wnos.ini files, {username} INI, and $MAC INI Files to enable a VNC shadowing prompt to a user. See also VncPassword in Connection Settings: wnos.ini files only to specify a string of up to 8 characters as the password used for shadowing. VNCD_8bits - Default is yes. Yes/no option to force the VNC server to send out images with 8-bits-per-pixel; if set to no, the VNC server will send out images with the current system color depth. VNCD_Zlib - Default is no. Yes/no option to allow the VNC server to send data with Zlib compression. This parameter specifies whether to show the "HW" label at the top left corner of video or not when HDX is hardware decoded. The default value is 0. Set flashingHW to 0, if you want to hide HW. Set flashingHW to 1, if you want to show HW. Default is no.