Dell Wyse 3020 Wyse ThinOS Version 8.5 INI Reference Guide - Page 42
S10 WDM Flash statement., disableNotice={yes
View all Dell Wyse 3020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
[Priority ={WDM, CCM, "WDM;CCM", "CCM;WDM"}] [disableNotice={yes, no}] [disableCancel={yes, no}] [noticeTime={0-255}] [interval = {0-65535}] WDMFlash=flash_size WDMService={yes, no} [DHCPinform={no, yes}] [DNSLookup={no, yes}] [QuickMode={yes, no}] [Discover={yes, no}] [SecurityMode={default, full, warning, low}] 42 Parameters for wnos INI files only Priority-If priority is available, WDA discovers the protocol according to it. There are only two protocols available now - WDM, and CCM. For example, if priority=WDM; CCM, WDA tries to discover WDM server and tries to check-in, and if it fails to check-in to WDM server, it tries to check-in the device to CCM server. disableNotice-If option is set to yes, count down prompt will not show when configuration from WDM is received. Default is no. disableCancel-If set to yes, there is no possibility to cancel count down prompt for WDM (device is going to reboot). Default is no. noticeTime-If this is set, then the time of countdown prompt is changed to seconds. Default is 20 seconds. Examples: WDAService=yes disableNotice=no disableCancel=yes noticeTime=0. In this scenario, count down prompt is displayed if WDM configuration is received, but you are not allowed to cancel system reboot, and amount time of count down prompt is set to default value (20 seconds). interval-If interval is available, WDA rediscovery is delayed after check-in fails (both CCM and WDM fails). This delay is changed to interval minutes. Default is 0. (WDA rediscovery delay is 24 hours). Example: WDAService=yes interval=30 WDA rediscovery delay is set as 30 minutes. The specified value will be saved into NVRAM, and then reports to the WDM server. This statement ensures that all the units would function with DDC regardless of flash size. This statement is valid for all platforms and replaces the previous S10 WDM Flash statement. Default is yes. WDMService - Yes/no option to disable the WDM agent. Discovering the WDM server is supported by the following: 1 DNS host name lookup wdmserver 2 DNS service location record _wdmserver._tcp 3 DHCP option tag values received from standard or WDM proxy DHCP service for vendor class RTIAgent DHCPinform - Default is no. Yes/no option to use DHCP information. DNSLookup - Default is no. Yes/no option to use DNSLookup. For Example: If WDMService=yes, setting DHCPinform=yes will do number 3, setting DNSLookup=yes will do numbers 1 and 2. If QuickMode=yes is specified, rapport agent will not block any other process during ThinOS boot up, and boot time of ThinOS will speed up. NOTE: If file server is changed by WDM server, device will reboot automatically to make sure all settings from WDM server take effect. Default is yes.