Dell Wyse 3020 Wyse ThinOS Version 8.5 INI Reference Guide - Page 46
The MirrorFileServer parameter also supports the DeskColor parameter., yes in the wnos.ini
View all Dell Wyse 3020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
BootpDisable={no, yes} CmosPassword= [encrypt={no, yes}] CustomInfo={yes, no} [Custom1=custom1_str] [Custom2=custom2_str] [Custom3=custom3_str] [Location=location_str] [Contact=contact_str] **DeskColor="rrr ggg bbb" **Desktop=bitmap file [Layout={center, tile, stretch}] [IconTextColor="rrr ggg bbb"] Device=cmos If the first boot order is not HardDisk, the system restart will boot from the BIOS setting. Default is no. BootpDisable - Yes/no option to disable BOOTP requests. ThinOS supports both DHCP and BOOTP to obtain the network configurations. In the first two attempts, only DHCP is requested. Then, both DHCP and BOOTP are requested. For some environments, BOOTP requests will delay obtaining the IP from the DHCP server. Set BootpDisable=yes will only perform a DHCP request. This setting is only valid after the next reboot. CmosPassword - Specifies the BIOS password on supported platforms; string up to 8 characters. encrypt - Default is yes. If encrypt=yes, an encrypted string is used as a password and the password is encoded by Dell Wyse encrypt tool. Yes/no option to configure or store custom information. If CustomInfo=yes, the custom information configured by the following options will be stored into NVRAM. If CustomInfo=no, the custom information in NVRAM will be cleared. For example: CustomInfo=yes custom1=11 custom2=2 custom3=3 location=wyse contact=peter NOTE: Maximum length is 32 characters. Default is "16 100 36"; where DeskColor ="16 100 36" (green) is the default. Specifies the desktop background color in RGB string format that must be enclosed in quotes, where rrr, ggg, and bbb are decimal numbers in the rage of 0 to 255. When using this parameter in a wnos.ini file, it will be saved to NVRAM if EnableLocal is set to yes in the wnos.ini file. NOTE: The MirrorFileServer parameter also supports the DeskColor parameter. Desktop - Specifies a bitmap file to be used as wallpaper for the local desktop. This file could be a 4-bit, 8-bit, or 24-bit BMP file or a standard GIF file or a standard JPEG file. The file must be located in the FTP server wnos\bitmap directory. Default is Wyse wallpaper. To disable the parameter, leave value blank (Desktop=wysedefault). Layout - Default is stretch. Specifies the arrangement on the desktop background of the bitmap file specified by the Desktop parameter, if auto dial-up is set, Layout is invalid. For center, the image is placed in the center of the desktop without image size change. For tile, the image is replicated across the desktop. For stretch, the image is modified to fill the desktop. NOTE: The MirrorFileServer parameter also supports the DeskColor parameter. IconTextColor - Specifies the icon text color in RGB string format that must be enclosed in quotes, where rrr, ggg and bbb are decimal numbers in the range of 0 to 255. CMOS management (extract and restore cmos settings). 46 Parameters for wnos INI, {username} INI, and $MAC INI files