Dell Wyse 3020 Wyse ThinOS Version 8.5 INI Reference Guide - Page 64
DisableBeep, DisableKeyStroke, SetCardType, DisableInitialization, The INI, is applicable
![]() |
View all Dell Wyse 3020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
4 - 3/4 5 - 1 6 - 2 7 - No Repeat NOTE: These settings in a wnos.ini file will be saved into NVRAM if EnableLocal=yes is set in the wnos.ini file. Device=Rfideas [DisableBeep={yes, no}] [DisableKeystroke={yes, no}] [SetCardType={yes, no} Configuration1={*} Configuration2={*} ] [DisableInitialization={yes, no}] [DisableLed={yes, no} Device=Rfideas - Specifies the local Rfideas readers. DisableBeep - Default is yes. Option disables the beep sound when the card is read. DisableKeyStroke - Default is yes. Option disables the keyboard movements and key strokes. SetCardType - Default is no. Used only for pcProx Plug readers. • If set to yes, then the Configuration #1 initializes to HID Prox 608x compatibility and Configuration #2 initializes to RDR-758x Equivalent. • If set to no, then the card type remains unchanged. DisableInitialization - Default is no. Option disables configurations to the card reader. DisableLed-If set to yes, then LED is turned off. If set to no, then LED is controlled by Reader. The default value is not set. Device=UsbSerial [start=com{1~4}] [com{1~4}=com{5~8}] **DisableMouse={no, yes} or MouseDisable={no, yes} Specifies the first COM port number that can be used by USBserial port. For example, the first USB-Serial port on a VL10 thin client is COM2 by default, but it can be changed to COM3 with the INI file Device=UsbSerial Start=COM3. 1 Without any ini setting: The COM number registered is related with USB port number. Since USB port number is hardware property, it is always mounted in the same order, and there is no relation with the plug sequence. 2 If Device=UsbSerial start=COMx is set, then rule 1 does not work, the COM number is set by "x", and "x" range is 1-4, since ThinOS only supports maximum of four COM. 3 If COMx=COMy is set, the range for x is 1 - 4, and the real name in ThinOS is considered. The range for "y" is 5 - 8, since ICA running on ThinOS only supports maximum of eight COM. NOTE: The INI [com{1~4}=com{5~8}] is applicable for ICA connections only. DisableMouse - Default is no. Yes/no option to disabled mouse pointer so that it is shown on the screen. The pointer is enabled if any mouse activity occurs. or MouseDisable - Default is no. Yes/no option to disabled mouse pointer so that it is shown on the screen. The pointer is enabled if any mouse activity occurs. 64 Parameters for wnos INI, {username} INI, and $MAC INI files
![](/manual_guide/products/dell-wyse-3010-wyse-thinos-version-85-ini-reference-guide-be781d6/64.png)