Dell Wyse 3020 Wyse ThinOS Version 8.5 INI Reference Guide - Page 71
Connect Manager list. When connections, PreferBand={None, 2.4G, 5G}]
View all Dell Wyse 3020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
[PreferBand={None, 2.4G, 5G}] [Priority=ssid_list] [DisableN={no, yes}] [DisableWlan={yes, no, EnetUp}] DISABLETSGW **EnableLocal={no, yes} [HideDefault={no, yes}] ENABLETSGWSAMEINFO Algorithm - Specifies the authentication method of WEP between ThinOS and the access point. If set to Open, open authentication will be selected. If set to ShareKey, shared key authentication will be selected. DisableBand - Default is None. Use to disable 2.4G or 5G 802.11 band. PreferBand -This parameter is used to set the priority of wireless connection band, and select the 2.4G or 5G access point to connect. Default is None. Priority - sets the priority of wireless profiles. The ssid list is separated by a semicolon or comma and the priority is from high to low. DisableN - Default is no. Yes/no option to disable 802.11n Wi-Fi wireless networking. DisableWlan- Used to disable the wireless connection. If DisableWlan=EnetUp, and the Ethernet is on while booting, the wireless connection is disabled. Device=Wireless Mode=Infrastructure SSID=ThinIsIn IEEE8021X=yes network=wireless profile=ThinIsIn access=WPA2-ENT eap=yes eaptype=EAP-PEAP peapeap=EAP-MSCHAPV2 Device=Wireless Mode=Infrastructure SSID=wtos_95 roamsensitive=high IEEE8021X=yes network=wireless profile=wtos_95 access=WPA2-ENT eap=yes eaptype=EAP-PEAP peapeap=EAP-MSCHAPV2 Device=Wireless Mode=Infrastructure SSID=wtos_11n IEEE8021X=yes network=wireless profile=wtos_11n access=WPA2-PSK wpa2pskpwd=2wsx3edc Device=Wireless Priority="wtos_11n,wtos_95,ThinIsIn" IMPORTANT: DISCONTINUED. DO NOT USE. See TSGWENABLE Default is no. Yes/no option to enable locally configured entries to show in the Connect Manager list. When connections defined in local NV-RAM are displayed in the Connect Manager, they are marked with an asterisk. If EnableLocal=yes is in a wnos.ini file, then the global information will be saved into NVRAM. NOTE: The global information includes: SEAMLESS, ALTERNATE, Reconnect, icaBrowsing, LowBand, NoReducer, Time settings, and Printer settings in a wnos.ini file. HideDefault - Default is no. Yes/no option to hide the default ICA and RDP connections that are present on the devices. IMPORTANT: DISCONTINUED. DO NOT USE. Parameters for wnos INI, {username} INI, and $MAC INI files 71