Dell Wyse 3020 Wyse ThinOS Version 8.5 INI Reference Guide - Page 75
fastidentity={Identity for EAP_FAST}], encryption={TKIP|CCMP}]
View all Dell Wyse 3020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
[wpapskpwdEnc={passphrase encrypted for WPA-PSK}] [wpa2pskpwd={passphrase for WPA2-PSK}] [wpa2pskpwdEnc={passphrase encrypted for WPA2-PSK}] [encryption={TKIP|CCMP}] [fasteap={EAP-MSCHAPV2, EAP-GTC}] [fastidentity={Identity for EAP_FAST}] [fastmschapun={username for EAP-FAST/EAP-MSCHAPV2}] [fastpmschappwd={password for EAP-FAST/EAP-MSCHAPV2}] [fastmschappwdEnc={password encrypted for EAP-FAST/EAPMSCHAPV2}] [fastmschapdm={domain for EAP-FAST/EAP-MSCHAPV2}] [fastmschaphidedm={yes,no}] [fastsinglesignon={yes, no}] [fastgtcun={username for EAP-FAST/EAP-GTC}] [fastgtcpwd={password for EAP-FAST/EAP-GTC}] [fastgtcpwdEnc={password for encrypted for EAP-FAST/EAPGTC}] **Inactive={0, to 480} (minutes) [NoSessionTimer=0-480] IPProto=ICMP [DisableTStamp={yes, no}] [DisableEcho={yes, no}] Example: IEEE8021X=yes network=wireless access=wpa-ent eap=yes eaptype=eap-tls tlsclntcert=user.cer tlsclntprikey=user.pfx tlsclntprikeypwd=12345678 OR IEEE8021X=yes network=wireless access=wpa-ent eap=yes eaptype=eap-tls tlsclntcert=user.cer tlsclntprikey=user.pfx tlsclntprikeypwd=12345678 leapun=user1 password=1234 peapmschapun=user1 peapmschappwd=12345 peapmschapdm=wyse.com IEEE8021X=yes network=wired eap=yes eaptype=eap-tls tlsclntcert=user.cer tlsclntprikey=user.pfx tlsclntprikeypwd=12345678 By default, peapidentity is same as peapmschapun.If peapmschaphidedm is set to yes, the domain will use saved peap MSCHAP domain name and the prompts dialog will not include the domain field when you perform ieee8021x authentication. The following example describes wildcard server validation: IEEE8021X=yes network=WIRED access=WPA2-ENT servervalidate=yes eap=yes eaptype=EAP-PEAP servercheck=yes servername=w2k8ACS-64.sqawirelsess.com peapmschapdm=EAP-MSCHAPV2 peapgtcun=sqawirless2 peapmschappwd=123!@#qwe The username of ieee8021x (fastmschapun, peapmschapun, peapgtcun, leapun) can be configured as system variables like $mac, $sn etc. By default, fastidentity is same as fastmschapun. If fastmschaphidedm is set to yes, the domain uses saved EAP_FAST MSCHAP domain name, and the prompts dialog does not include the domain field when you perform ieee8021x authentication. The following example describes wildcard server validation:IEEE8021X=yes network=WIRED access=WPA2ENT servervalidate=yes eap=yes eaptype=EAP-FAST servercheck=yes servername=w2k8ACS-64.sqawirelsess.com fastmschapdm=EAP-MSCHAPV2 fastgtcun=sqawirless2 fastmschappwd=123!@#qwe Default is 0. Specifies that if there is no keyboard or mouse use in the configured time in minutes, it will sign off or shutdown or reboot depending on AutoSignoff= ... If NoSessionTimer is set, then when there is an active sessions, use this timer to replace the Inactive value. The following controls whether to reboot or shutdown or sign off. AutoSignoff=yes [Shutdown=yes] [Reboot=yes] Configures the ICMP protocol. DisableTStamp - If DisableTStamp=yes, the system will not reflect the ICMP timestamp (13) request. Parameters for wnos INI, {username} INI, and $MAC INI files 75