Dell Wyse 3020 Wyse ThinOS Version 8.5 INI Reference Guide - Page 77
An https protocol must be used., DisableBeep, KisokMode, EnableFUS, TaptoLock
View all Dell Wyse 3020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
OneSignServer=onesign_server [DisableBeep={no, yes} [KioskMode={no, yes}] [EnableFUS={no, yes}] [TapToLock={0, 1, 2}] [EnableWindowAuthentication={yes,no}] [AutoAccess={VMW,XD,XA}] [NetBIOSDomainName={no, yes}] NOTE: By default both the ICA and RDP protocols compress their data to minimize the amount of data that needs to traverse the network. This compression can be as much as 50 percent for textbased applications such as Microsoft Word and 40 percent less for graphics applications than the uncompressed data streams. Specifies a list of host names or IP addresses with optional TCP port number or URLs of Imprivata OneSign servers. IMPORTANT: An https protocol must be used. OneSign virtual desktop access offers a seamless authentication experience and can be combined with single sign-on for no click access to desktops and applications in a virtual desktop environment. The following inputs are acceptable values: https://ip or https://FQDN DisableBeep - Default is no. Yes/no option to set the Rfideas reader to mute when a card is tapped. KisokMode - Default is no. Yes/no option to allow the OneSign user to share the client desktop. EnableFUS - Default is no. Yes/no option to set the Citrix client to remain running when switch users. TaptoLock - Default is 2. Only active when KioskMode=yes. Specifies tap to lock. If TapToLock=0, then tap a card to lock terminal is disabled. If TapToLock=1 (Tap to lock), then use the proximity card to lock the terminal. If TapToLock=2 (Tap over), then lock the terminal and log in a different user. EnableWindowAuthentication - Default is yes. Yes/no option to sign-on with the user's Windows credentials to pre-defined broker if the OneSign sign-on fails. AutoAccess - Specifies the corresponding type of broker to automatically start. If not defined, the broker type is obtained from the Imprivata Server setting of the computer and user policy. If none of them is defined, then the first available broker server from the Imprivata server is started. NOTE: AutoAccess can be set in [username].ini and wnos.ini, however, the wnos.ini, has priority over [username].ini. NetBIOSDomainName - Default is no. Yes/no option to enable the authentication to the broker server using the NetBIOS domain name. If set to yes, the Imprivata domain list will show NetBIOS Parameters for wnos INI, {username} INI, and $MAC INI files 77