Dell Wyse 3020 Wyse ThinOS Version 8.5 INI Reference Guide - Page 83
session 0=256, 1=High color, 2=True Color., VUSB_VIDEO={yes
View all Dell Wyse 3020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
[smartcards={no, yes}] [mapdisks={no, yes}] [disablesound={no, yes, 2}] [unmapusb={no, yes}] [DisksReadOnly={no, yes}] [MouseQueueTimer={0-99}] [WyseVDA={no, yes}] [WyseVDA_PortRange=startPort, endPort] [UnmapClipboard={no, yes}] [DefaultColor={0,1,2}] [VUSB_DISKS={yes, no}] [VUSB_AUDIO={yes, no}] [VUSB_VIDEO={yes, no}] [VUSB_PRINTER={yes, no}] [FullScreen={no, yes}] [Resolution={default, vga_resolution}] [DisableResetVM={no, yes}] [WyseVDAServerPort=serverPort] [FontSmoothing={yes, no}] [AutoConnect={yes, no}] [MultiMonitor={yes, no}] [EnableImprivataVC={yes,no}] [Locale=LocaleID] [SessionLogoffTimeout=seconds] [GroupSession={yes,no}] smartcards - Default is no. Yes/no option to use smartcards. mapdisks - Default is no. Yes/no option to map disks. disablesound - Default is no. Yes/no option to disable sound. If value is set to 2, the sound at remote computer is disabled. unmapusb - Default is no. Yes/no option to un-map USBs. DisksReadOnly - Default is no. Yes/no option to mount mass storage disks as read-only. MouseQueueTimer - Specifies the default queue timer of a mouse event in an ICA or RDP session (in 1/100 of a second). It can be used to adjust the bandwidth of a network. WyseVDA - Default is no. Yes/no option to enable Virtual Desktop Accelerator for all ICA and RDP sessions. WyseVDA_PortRange - Sets the ThinOS VDA client port range. The port range must follow these rules: 1 The port range is a list of start port and end port separated by a semicolon (;) or a comma (,). 2 Both ports must be between 1 and 65535. 3 The end port must be greater than start port. For example, WyseVDA_PortRange=3000,3010, the start port is 3000, the end port is 3010. UnmapClipboard - Default is no. Yes/no option to disable clipboard redirection for all sessions. For ICA and RDP, specifies if redirecting the clipboard. This setting in wnos.ini will be saved into nvram, if EnableLocal parameter is set to yes in wnos.ini. DefaultColor - Specifies the default color depth to use for the session 0=256, 1=High color, 2=True Color. VUSB_DISKS, VUSB_AUDIO, VUSB_VIDEO, and VUSB_PRINTER - Default no. Specifies if these USB devices will be redirected to the server using TCX Virtual USB or ICA or RDP USB redirection. By default, these devices are set as local devices. NOTE: For example, if you want to use USB disks as a network disk, you can set SessionConfig=all mapdisks=yes VUSB_DISKS=no. If you want to use USB disks as server side device, you can set SessionConfig=all mapdisks=no VUSB_DISKS=yes. The devices are displayed in device manager of the session. FullScreen - Default is no. Specifies the default screen mode. When using FullScreen in a Dual Screen mode, the session will be displayed in Span mode Resolution - Default is default. Specifies the session resolution. For example, 640 x 480 and other supported resolutions. Default will set the resolution to the native resolution of the monitor. Setting the resolution to a value smaller than the native resolution of the monitor, will allow the session in Windowed mode. The resolution value cannot be higher than the native resolution. DisableResetVM - Default is no. Set DisableResetVM=yes to disable Reset VM function. As default, this function is controlled by the server side is enabled including VMware View or Citrix PNA. Parameters for wnos INI, {username} INI, and $MAC INI files 83