Dell XPS 13 9310 2-in-1 XPS 13 2-in-1 9310 2n1 Service Manual - Page 17

Steps, Next steps, Connect the battery cable to the interposer board.

Get Dell XPS 13 9310 2-in-1 PDF manuals and user guides View all Dell XPS 13 9310 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

Steps 1. Adhere the magnet and the metal bar to the battery. NOTE: Install the magnet and the metal bar from the faulty battery. 2. Align the screw holes on the battery with the screw holes on the system board and palm-rest assembly. 3. Replace the two screws (M1.2x4) that secure the battery to the system board. 4. Replace the seven screws (M1.6x3) that secure the battery to the palm-rest assembly. 5. Place the interposer board to the connector on the system board. NOTE: The interposer board is not polarity sensitive and both sides are compatible. 6. Connect the battery cable to the interposer board. 7. Replace the Torx 5 screw (M1.6x3.4) that secures the battery cable to the system board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Removing and installing components 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
Steps
1.
Adhere the magnet and the metal bar to the battery.
NOTE:
Install the magnet and the metal bar from the faulty battery.
2.
Align the screw holes on the battery with the screw holes on the system board and palm-rest assembly.
3.
Replace the two screws (M1.2x4) that secure the battery to the system board.
4.
Replace the seven screws (M1.6x3) that secure the battery to the palm-rest assembly.
5.
Place the interposer board to the connector on the system board.
NOTE:
The interposer board is not polarity sensitive and both sides are compatible.
6.
Connect the battery cable to the interposer board.
7.
Replace the Torx 5 screw (M1.6x3.4) that secures the battery cable to the system board.
Next steps
1.
Install the
base cover
.
2.
Follow the procedure in
After working inside your computer
.
Removing and installing components
17