Dell XPS 13 9310 2-in-1 XPS 13 2-in-1 9310 2n1 Service Manual - Page 28
Align the screw holes on the USB Type-C bracket to the screw holes on the system board.
![]() |
View all Dell XPS 13 9310 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Steps 1. Align and place the power-button and fingerprint reader bracket on the palm-rest assembly. 2. Align the screw holes on the system board with the screw holes on the palm-rest assembly. 3. Replace the fours screws (M2x4), three screws (M1.2x3), and one screw (M1.2x4) that secure the system board to the palm-rest assembly. 4. Connect the keyboard-controller board cable to the system board and close the latch to secure the cable. 5. Connect the speaker cable to the system board. 6. Adhere the fingerprint-reader board to the slot on the system board. 7. Connect the fingerprint-reader cable to the system board and close the latch to secure the cable. 8. Align the screw holes on the USB Type-C bracket to the screw holes on the system board. 9. Replace the screw (M1.6x3) and the screw (M1.6x2) that secures the USB Type-C port bracket to the system board. NOTE: The M1.6x2 screw has a bigger head than the M1.6x3 screw. 10. Route the display cable and camera cable through the routing guides on the system board. 11. Connect the display cable and camera cable to the system board. 28 Removing and installing components
![](/manual_guide/products/dell-xps-13-9310-2in1-xps-13-2in1-9310-2n1-service-manual-3c3dc7b/28.png)