Dell XPS 13 9310 2-in-1 XPS 13 2-in-1 9310 2n1 Service Manual - Page 22

Speakers, Removing the speakers

Get Dell XPS 13 9310 2-in-1 PDF manuals and user guides View all Dell XPS 13 9310 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

5. Connect the display cable and camera cable to the system board. 6. Adhere the tapes that secure the display cable and camera cable to the system board. 7. Align and place the display-cable bracket on the system board. 8. Tighten the captive screw (M1.6x3) that secures the display-cable bracket to the system board. Next steps 1. Install the battery. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. Speakers Removing the speakers Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the battery. About this task The following image indicates the location of speakers and provides a visual representation of the removal procedure. Steps 1. Disconnect the speaker cable from the system board. 2. Note the routing of the speaker cable and remove the speaker cable from the routing guides on the palm-rest assembly. 3. Using a plastic scribe, pry the speakers off the palm-rest assembly. 22 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
5.
Connect the display cable and camera cable to the system board.
6.
Adhere the tapes that secure the display cable and camera cable to the system board.
7.
Align and place the display-cable bracket on the system board.
8.
Tighten the captive screw (M1.6x3) that secures the display-cable bracket to the system board.
Next steps
1.
Install the
battery
.
2.
Install the
base cover
.
3.
Follow the procedure in
After working inside your computer
.
Speakers
Removing the speakers
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
3.
Remove the
battery
.
About this task
The following image indicates the location of speakers and provides a visual representation of the removal procedure.
Steps
1.
Disconnect the speaker cable from the system board.
2.
Note the routing of the speaker cable and remove the speaker cable from the routing guides on the palm-rest assembly.
3.
Using a plastic scribe, pry the speakers off the palm-rest assembly.
22
Removing and installing components