Dell XPS 13 Plus 9320 XPS 13 Plus 9320 / XPS 9320 Service Manual - Page 23
Removing the M.2 2280 solid-state drive, Steps, Next steps, Prerequisites, About this task
![]() |
View all Dell XPS 13 Plus 9320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Steps 1. Align the notch on the M.2 2230 solid-state drive with the tab on the solid-state drive slot. 2. Slide the M.2 2230 solid-state drive into the solid-state drive slot. 3. Insert the tab of the M.2 solid-state drive shield into the peg on the system board. 4. Replace the screw (M2x3) that secures the M.2 solid-state drive shield to the system board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Removing the M.2 2280 solid-state drive Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task NOTE: Depending on the configuration ordered, your computer may support an M.2 2230 solid-state drive or an M.2 2280 solid-state drive. NOTE: This procedure applies only to computers shipped with an M.2 2280 solid-state drive. The following image(s) indicate the location of the M.2 2280 solid-state drive and provides a visual representation of the removal procedure. Removing and installing components 23
![](/manual_guide/products/dell-xps-13-plus-9320-xps-13-plus-9320-xps-9320-service-manual-493c873/23.png)