Dell XPS M140 MXC051 XPS M140 Service Manual - Page 10

Internal Card With Bluetooth® Wireless Technology: Dell™ XPS M140 Service Manual

Page 10 highlights

Back to Contents Page Internal Card With Bluetooth® Wireless Technology Dell™ XPS M140 Service Manual Removing the Bluetooth Module Replacing the Bluetooth Module NOTE: If you ordered the optional internal card with Bluetooth wireless technology at the same time that you ordered your computer, the card is already installed. Removing the Bluetooth Module CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. 1. Follow the instructions in Preparing to Work Inside the Computer. 2. Loosen the two captive screws on the modem/Mini PCI/wireless cover, then remove the cover and set it aside. 1 modem/Mini PCI/wireless cover 2 captive screws (2)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

Back to Contents Page
Internal Card With Bluetooth® Wireless Technology
Dellâ„¢ XPS M140 Service Manual
Removing the Bluetooth Module
Replacing the Bluetooth Module
NOTE: If you ordered the optional internal card with Bluetooth wireless technology at the same time that you
ordered your computer, the card is already installed.
Removing the Bluetooth Module
CAUTION:
Before you perform any of the procedures in this section, follow the safety instructions in the
Product Information Guide
.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface (such as the back panel) on the computer.
1. Follow the instructions in
Preparing to Work Inside the Computer
.
2. Loosen the two captive screws on the modem/Mini PCI/wireless cover, then remove the cover and set it aside.
1
modem/Mini PCI/wireless cover
2
captive screws (2)