Dell XPS M140 MXC051 XPS M140 Service Manual - Page 69

BIOS Updates: Dell™ XPS M140 Service Manual, Flashing the BIOS

Get Dell XPS M140 MXC051 PDF manuals and user guides View all Dell XPS M140 MXC051 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

Back to Contents Page BIOS Updates Dell™ XPS M 140 Service Manual Flashing the BIOS Flashing the BIOS NOTICE: Plug the AC adapter into a known-good power source to prevent a loss of power. Failure to do so may cause damage to the computer. 1. Ensure that the AC adapter is plugged in and that the main battery is properly installed. 2. Turn on the computer. NOTE: If you use a BIOS update program CD to flash the BIOS, set up the computer to boot from a CD before inserting the CD. 3. Insert the BIOS update program floppy disk or CD, then reboot the computer. NOTICE: Do not interrupt the flash BIOS process once it begins. Interrupting the process may cause damage to the computer. Follow the instructions that appear on the screen. The computer continues to boot and updates the new BIOS. When the flash update is complete, the computer will automatically reboot. 4. Press during POST to enter the system setup program. 5. Press and to reset the computer defaults. 6. Press , select Save changes and reboot, and press to save configuration changes. 7. Remove the flash BIOS update program floppy disk or CD from the drive and restart the computer. Back to Contents Page

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
Back to Contents Page
BIOS Updates
Dell™ XPS M 140 Service Manual
Flashing the BIOS
Flashing the BIOS
NOTICE: Plug the AC adapter into a known-good power source to prevent a loss of power. Failure to do so
may cause damage to the computer.
1. Ensure that the AC adapter is plugged in and that the main battery is properly installed.
2. Turn on the computer.
NOTE: If you use a BIOS update program CD to flash the BIOS, set up the computer to boot from a CD before
inserting the CD.
3. Insert the BIOS update program floppy disk or CD, then reboot the computer.
NOTICE: Do not interrupt the flash BIOS process once it begins. Interrupting the process may cause damage to
the computer.
Follow the instructions that appear on the screen. The computer continues to boot and updates the new BIOS. When
the flash update is complete, the computer will automatically reboot.
4. Press <F2> during POST to enter the system setup program.
5. Press <Alt> and <f> to reset the computer defaults.
6. Press <Esc>, select
Save changes and reboot
, and press <Enter> to save configuration changes.
7. Remove the flash BIOS update program floppy disk or CD from the drive and restart the computer.
Back to Contents Page