Dell XPS M140 MXC051 XPS M140 Service Manual - Page 41

Replacing the Display Assembly

Get Dell XPS M140 MXC051 PDF manuals and user guides View all Dell XPS M140 MXC051 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

1 display assembly 3 antenna cable retaining clips 5 display cable 2 Mini PCI antenna cables 4 antenna cable connectors 6 M2.5 x 5-mm screws (4) Replacing the Display Assembly CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. 1. Follow the instructions in Preparing to Work Inside the Computer 2. Follow the instructions in Removing the Display Assembly. 3. Align the new display assembly over the screw holes in the base of the computer. 4. Replace the four M2.5 x 5-mm screws (two on each side) to secure the display assembly to the base of the computer. 5. Connect the Mini PCI antenna cable connectors and press the cables into the retaining clips on the base of the computer. 6. Connect the display cable to the system board. 7. Replace the keyboard (see Replacing the Keyboard). 8. Replace the hinge cover (see Replacing the Hinge Cover).

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
1
display assembly
3
antenna cable retaining clips
5
display cable
2
Mini PCI antenna cables
4
antenna cable connectors
6
M2.5 x 5-mm screws (4)
Replacing the Display Assembly
CAUTION:
Before you perform any of the procedures in this section, follow the safety instructions in the
Product Information Guide
.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface (such as the back panel) on the computer.
1. Follow the instructions in
Preparing to Work Inside the Computer
2. Follow the instructions in
Removing the Display Assembly
.
3. Align the new display assembly over the screw holes in the base of the computer.
4. Replace the four M2.5 x 5-mm screws (two on each side) to secure the display assembly to the base of the
computer.
5. Connect the Mini PCI antenna cable connectors and press the cables into the retaining clips on the base of the
computer.
6. Connect the display cable to the system board.
7. Replace the keyboard (see
Replacing the Keyboard
).
8. Replace the hinge cover (see
Replacing the Hinge Cover
).