Denon AVR 1603 Owners Manual - Page 15

Punch Through • "Punch Through" is a function allowing you to operate the PLAY, STOP, MANUAL SEARCH and AUTO SEARCH buttons on the CD, TAPE, CDR/MD, DVD/VDP or VCR components when in the DBS/CABLE or TV mode. By default, nothing is set. 12 OPERATION Before operating 1 Set mode switch 1 to "VIDEO". 3 3 2 Set mode switch 2 to the component to be registered (DBS/CABLE or TV). 4 1 2 1 2 1 3 Press the DVD/VDP power button and the TV power button at the same time. • Indicator flash. 4 1 2 3 Input the number of the component you want to set. 4 5 6 (See Table 1) 7 8 9 0 2 Table 1 No. CD 1 TAPE 2 CDR/MD 3 DVD/VDP 4 VCR 5 No setting 0 ENGLISH Preparations: Check that all connections are proper. 1 Turn on the power. Press the power operation switch (button). (Main unit) (Remote control unit) • ¢ ON/STANDBY The power turns on and power indicator is lit. Several seconds are required from the time the power operation switch is set to the "¢ ON/STANDBY" position until sound is output. This is due to the built-in muting circuit that prevents noise when the power switch is turned on and off. Set the power operation switch to this position to turn the power on and off from the included remote control unit. • £ OFF The power turns off and power indicator is off. In this position, the power cannot be turned on and off from the remote control unit. 2 Select the front speakers. Press the SPEAKER A or B button turn the speaker on. (Main unit) (Remote control unit) • The front speaker A, B setting can be also be changed with the SPEAKER button on the remote control unit. 15