Denon AVR 1603 Owners Manual - Page 28

Specifications, Line Input - Pre Out

Page 28 highlights

20 SPECIFICATIONS 2 Audio section • Power amplifier Rated output: Front: 70 W + 70 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.) 100 W + 100 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Center: 70 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.) 100 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Surround: 70 W + 70 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.) 100 W + 100 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Output terminals: Front: A or B 16 to 16 Ω/ohms A+B 12 to 16 Ω/ohms or more Center/Surround: 16 to 16 Ω/ohms • Analog LINE input - PRE OUT Input sensitivity/input impedance: 200 mV/47 kΩ/kohms Frequency response: 10 Hz ~ 100 kHz: +1, -3 dB (TONE DEFEAT ON) S/N ratio: 98 dB (IHF-A weighted) (TONE DEFEAT ON) 2 Video section • Standard video jacks Input/output level and impedance: Frequency response: • S-video jacks Input/output level and impedance: Frequency response: 1 V p-p, 75 Ω/ohms 5 Hz ~ 10 MHz - +1, -3 dB Y (brightness) signal - 1 Vp-p, 75 Ω/ohms C (color) signal - 0.286 Vp-p, 75 Ω/ohms 5 Hz ~ 10 MHz - +1, -3 dB 2 Tuner section Receiving range: Usable sensitivity: 50 dB quieting sensitivity: S/N ratio: Total harmonic distortion: [FM] (note: µV at 75 Ω/ohms, 0 dBf = 1 x 10-15 W) 87.50 MHz ~ 108.00 MHz 1.0 µV (11.2 dBf) MONO 1.6 µV (15.3 dBf) STEREO 23 µV (38.5 dBf) MONO 80 dB (IHF-A weighted) STEREO 75 dB (IHF-A weighted) MONO 0.15 % (1 kHz) STEREO 0.3 % (1 kHz) [AM] 522 kHz ~ 1611 kHz 18 µV 2 General Power supply: Power consumption: Maximum external dimensions: Mass: AC 230 V, 50 Hz 210 W 434 (W) x 147 (H) x 417 (D) mm 10.4 kg 2 Remote control unit (RC-920) Batteries: External dimensions: Mass: R6P/AA Type (two batteries) 55 (W) x 225 (H) x 34.5 (D) mm 165 g (including batteries) For purposes of improvement, specifications and design are subject to change without notice. ENGLISH 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58

29
ENGLISH
2
Audio section
Power amplifier
Rated output:
Front:
70 W + 70 W
(8
/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
100 W + 100 W (6
/ohms, 1 kHz with 0.7 % T.H.D.)
Center:
70 W
(8
/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
100 W
(6
/ohms, 1 kHz with 0.7 % T.H.D.)
Surround:
70 W + 70 W
(8
/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
100 W + 100 W (6
/ohms, 1 kHz with 0.7 % T.H.D.)
Output terminals:
Front:
A or B
1
6 to 16
/ohms
A+
B
12 to 16
/ohms or more
Center/Surround:
1
6 to 16
/ohms
Analog
LINE input - PRE OUT
Input sensitivity/input impedance:
200 mV/47 k
/kohms
Frequency response:
10 Hz ~ 100 kHz: +1,
3 dB (TONE DEFEAT
ON)
S/N ratio:
98 dB (IHF-A weighted)
(TONE DEFEAT
ON)
2
Video section
Standard video jacks
Input/output level and impedance:
1 V p-p, 75
/ohms
Frequency response:
5 Hz ~ 10 MHz
+1,
3 dB
S-video jacks
Input/output level and impedance:
Y (brightness) signal
1 Vp-p, 75
/ohms
C (color) signal
0.286 Vp-p, 75
/ohms
Frequency response:
5 Hz ~ 10 MHz
+1,
3 dB
2
Tuner section
[FM]
(note:
μ
V at 75
/ohms, 0 dBf = 1 x 10
15
W)
[AM]
Receiving range:
87.50 MHz ~ 108.00 MHz
522 kHz ~ 1611 kHz
Usable sensitivity:
1.0 μV (11.2 dBf)
18 μV
50 dB quieting sensitivity:
MONO
1.6
μ
V (15.3 dBf)
STEREO
23
μ
V (38.5 dBf)
S/N ratio:
MONO
80 dB (IHF-A weighted)
STEREO
75 dB (IHF-A weighted)
Total harmonic distortion:
MONO
0.15 % (1 kHz)
STEREO
0.3 % (1 kHz)
2
General
Power supply:
AC 230 V, 50 Hz
Power consumption:
210 W
Maximum external dimensions:
434 (W) x 147 (H) x 417 (D) mm
Mass:
10.4 kg
2
Remote control unit (RC-920)
Batteries:
R6P/AA Type (two batteries)
External dimensions:
55 (W) x 225 (H) x 34.5 (D) mm
Mass:
165 g (including batteries)
For purposes of improvement, specifications and design are subject to change without notice.
20
SPECIFICATIONS