Denon AVR-1613 Owners Manual - Page 102
Default settings are underlined., Setting details, IP Address, Subnet Mask, Default Gateway
View all Denon AVR-1613 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Basic version Advanced version Settings Default settings are underlined. Make settings for wired LAN. Only set "Settings" when connecting to a network without a DHCP function. Setting details Network Information IP Control Friendly Name Settings q Settings DHCP IP Address Subnet Mask Default Gateway Primary DNS Secondary DNS Proxy w Off 192. 168. 000. 001 255. 255. 255. 000 000. 000. 000. 000 000. 000. 000. 000 000. 000. 000. 000 e Setting details Network • If you are using a broadband router (DHCP function), there is no need to make the settings at "IP Address" and "Proxy", since the DHCP function is set to "On" in this unit's default settings. • If this unit is being used connected to a network without the DHCP function, the network settings must be made. In this case, some knowledge of networks is required. For details, consult a network administrator. • If you cannot connect to the Internet, recheck the connections and settings (vpage 18). • If you do not understand about Internet connection, contact your ISP (Internet Service Provider) or the store from which you purchased your computer. • When you want to cancel the setting during IP address input, press o or BACK. v See overleaf q On the menu, select "Network" - "Settings" and press ENTER. w Use uio p to set "DHCP" to "Off", then press ENTER. The DHCP function is disabled. e Use uio p to input the address and press ENTER. • IP Address : Set the IP address within the ranges shown below. The Network Audio function cannot be used if other IP addresses are set. CLASS A: 10.0.0.1 - 10.255.255.254 CLASS B: 172.16.0.1 - 172.31.255.254 CLASS C: 192.168.0.1 - 192.168.255.254 • Subnet Mask : When connecting an xDSL modem or terminal adapter directly to this unit, input the subnet mask indicated in the documentation supplied by your provider. Normally input 255.255.255.0. • Default Gateway : When connected to a gateway (router), input its IP address. • Primary DNS, Secondary DNS : If there is only one DNS address indicated in the documentation supplied by your provider, input it at "Primary DNS". If there are two or more DNS addresses, input the first one at "Secondary DNS". r Press BACK. The display returns to the playback screen. • When connecting to the network via a Proxy server, select "Proxy" and press ENTER (vpage 100 "Proxy settings"). Information DVD 99