Denon AVR-1613 Owners Manual - Page 24
Preparation, Set up the subwoofer, Prepare the included setup microphone - installation to tv
View all Denon AVR-1613 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Basic version Advanced version Set up speakers (Audyssey® Setup) 1 Prepare the included setup microphone Mount the setup microphone on a tripod or stand and place it in the main listening position. When placing the setup microphone, adjust the height of the sound receptor to the level of the listener's ear. Sound receptor Setup microphone 2 Set up the subwoofer If using a subwoofer capable of the following adjustments, set up the subwoofer as shown below. For details, see your subwoofer's manual. nn When using a subwoofer with a direct mode Set the direct mode to "On" and disable the volume adjustment and crossover frequency setting. nn When using a subwoofer without a direct mode Make the following settings: • Volume : "12 o'clock position" • Crossover frequency : "Maximum/Highest Frequency" • Low pass filter : "Off" • Standby mode : "Off" Preparation 3 Connect the setup microphone to the SETUP MIC jack of this unit. When the setup microphone is connected, the following screen is displayed. If you do not have a tripod or stand, set up the microphone on, for example, a seat without a back. NOTE • Do not hold the setup microphone in your hand during measurements. • Avoid placing the setup microphone close to a seat back or wall as sound reflections may give inaccurate results. Audyssey Setup Your AVR can automatically measure the acoustics of your room and the optimize your speakers. Start • For information about setting up and connecting the speakers, see "Installation/connection of speakers (Advanced)" (vpage 69). • For connection to a TV, see "Connecting this unit to a TV via HDMI connections" (vpage 9). v See overleaf Information 21