Denon AVR-1613 Owners Manual - Page 25
Detection & Measurement Main, Preparation, Going back to the previous screen - 5 1 channel
View all Denon AVR-1613 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Basic version Advanced version Preparation (Continued) 4 Select "Start" and then press ENTER. The subwoofer volume setting screen is displayed. 5 Select "Next" and then press ENTER. Audyssey Setup MultEQ If your subwoofer has a volume control on it, please set it at 50%... VOLUME MIN MAX Back Next Set up speakers (Audyssey® Setup) Detection & Measurement (Main) • This step automatically checks the speaker configuration and speaker size, and calculates the channel level, distance, and crossover frequency. It also corrects distortion in the listening area. 6 Select "Begin Test" and then press ENTER. When measuring begins, a test tone is output from each speaker. • Measurement requires several minutes. 7 The detected speakers are displayed. • The illustration below shows an example of when the front speakers, center speaker, subwoofer and surround speakers have been detected. Audyssey Setup Speaker Detection Front Yes Center Yes Subwoofer Yes Surround Yes MultEQ NOTE If "Caution!" is displayed on TV screen: Go to "Error messages" (vpage 25). Check any related items, and perform the necessary procedures. If the problem is resolved, return and restart "Audyssey® Setup". Going back to the previous screen Press o or BACK. When measuring has stopped q Press BACK to display the popup screen. w Press o to select "Yes", and then press ENTER. Setting up the speakers again Repeat the operation from step 3. v See overleaf Repeat Last Test Next NOTE If a connected speaker is not displayed, the speaker may not be connected correctly. Check the speaker connection. 8 Select "Next" and then press ENTER. Information 22