Denon AVR-1613 Owners Manual - Page 26
Calculation, Measurement 2nd - 6th, Repeat step 9, measuring positions 3 to 6. - speakers
View all Denon AVR-1613 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Basic version Advanced version Set up speakers (Audyssey® Setup) Measurement (2nd - 6th) Calculation • In this step, you will perform measurements at multiple positions (two to six positions) other than the main listening position. • Just one position can be measured but measuring multiple positions increases the accuracy of the correction of acoustic distortion within the listening area. 9 Move the setup microphone to position 2, select "Continue", and then press ENTER. The measurement of the second position starts. Measurements can be made in up to six positions. 10 Repeat step 9, measuring positions 3 to 6. When measurement of position 6 is completed, a "Measurements Complete." message is displayed. Audyssey Setup Measurements Complete. MultEQ Calculation Repeat Last Test 11 Select "Calculation" and then press ENTER. Measuring results are analyzed, and the frequency response of each speaker in the listening room is determined. Audyssey Setup MultEQ Calibration complete! Now Calculating... Please wait... 75% Audyssey Setup MultEQ Place the microphone at ear level at 2nd Listening position. Continue Calculation • Analysis takes several minutes to complete. The more speakers and measurement positions that there are, the more time it takes to perform the analysis. v See overleaf • To skip measuring the third and subsequent listening position, use ui to select "Calculation" and press ENTER to proceed to step 12. • To measure the second position again, use ui to select "Repeat Last Test" and press ENTER. Information 23