Denon AVR-1613 Owners Manual - Page 84

Basic version Advanced version Surr.Parameter Default settings are underlined. You can adjust the surround audio sound field effects to match your preferences. The items (parameters) that can be adjusted depend on the signal being input and the currently set sound mode. For details on the adjustable parameters, see "Sound modes and surround parameters" (vpage 113). NOTE Some setting items cannot be set while playback is stopped. Make the settings during playback. Setting items Cinema EQ Soften the treble range of movie soundtracks for better understanding. Loudness Mngmt This can be set in the Dolby TrueHD mode. This sets whether to output as specified in "Dynamic Comp." or output directly without compressing the dynamic range of audio recorded in the disc. Dynamic Comp. Compress dynamic range (difference between loud and soft sounds). Setting details On : "Cinema EQ" is used. Off : "Cinema EQ" is not used. On : Outputs using the settings made in "Dynamic Comp.". Off : "Dynamic Comp." settings and "Dialogue normalization" (vpage 103) are disabled, and the signals on the disk are output as is. Auto : Automatic dynamic range compression on/off control according to source. Low / Medium / High : These set the compression level. Off : Dynamic range compression always off. Low Frequency Adjust the low-frequency effects level (LFE). You can set "Auto" only for the Dolby TrueHD source. -10dB - 0dB For proper playback of the different sources, we recommend setting to the values below. • Dolby Digital sources : "0dB" • DTS movie sources : "0dB" • DTS music sources : "-10dB" Audio Setting items Setting details Center Image Distributes the dialogue output from the center channel to the front left and right channels and widens the sound image in the front. You can set this when the sound mode is set to DTS NEO:6 in the "Music" mode. Panorama Assign front L/R signal also to surround channels for wider sound. You can set this when the sound mode is Dolby PLg in the "Music" mode. Dimension Shift sound image center to front or rear to adjust playback balance. You can set this when the sound mode is Dolby PLg in the "Music" mode. Center Width Distributes the dialogue output from the center channel to left and right channels and widens the sound image in the front. You can set this when the sound mode is Dolby PLg in the "Music" mode. 0.0 - 1.0 (0.3) The smaller the value, the more dialogue is concentrated on the center channel. The larger the value, the more dialogue is distributed to front left and right channels, and the more the sound image widens in the front. On : Set. Off : Do not set. 0 - 6 (3) As you set a smaller number, the surround sound field shifts backward; as you set a larger number, the surround sound field shifts forward. 0 - 7 (3) The smaller the value, the more dialogue is concentrated on the center channel. The larger the value, the more dialogue is distributed to front left and right channels, and the more the sound image widens in the front. v See overleaf Information DVD 81