Denon AVR-2106 Owners Manual - Page 19

Connecting Other Sources Connecting the antenna terminals An FM antenna cable plug can be connected directly to the unit. Direction of broadcasting station FM antenna 75 Ω/ohm COAXIAL cable FM indoor antenna (Supplied) AM loop antenna (Supplied) Ground AM outdoor antenna 2 AM loop antenna assembly Connect to the AM antenna terminals. 1 2 3 Remove the vinyl tie and take out the connection line. 4 a. Antenna placed on a stable surface. Mount Bend in the reverse direction. Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. NOTE: • Do not connect two FM antennas simultaneously. • Even if an external AM antenna is used, do not disconnect the AM loop antenna. • Make sure the AM loop antenna lead terminals do not touch metal parts of the panel. Connection of AM antennas 1. Push the lever. 2. Insert the conductor. b. Hanging the antenna on a wall. Use the installation hole to secure the antenna to a wall, etc. 3. Return the lever. ENGLISH Connecting Other Sources Connecting the XM terminal • AVR-2106 is the XM Ready® receiver. You can receive XM Satellite Radio® by connecting to the XM Connect-and-Play™ (sold separately) and subscribing the XM service. • Plug the XM Connect-and-Play antenna into XM terminal on the rear panel. • Position the XM Connect-and-Play antenna near a south-facing window to receive the best signal. For details, see "XM Satellite Radio" ( page 32). When making connections, also refer to the operating instructions of the XM Connect-and-Play antenna. XM Connect-and -Play Antenna XM F NOTE: • Keep the power supply cord unplugged until the XM Connect-and-Play antenna connection have been completed. 16 ENGLISH