Denon AVR-4806CI Owners Manual - Page 123

Setting the IP Address

Get Denon AVR-4806CI - AV Receiver PDF manuals and user guides
UPC - 081757507295
View all Denon AVR-4806CI manuals
Add to My Manuals
Save this manual to your list of manuals

Page 123 highlights

Network Setup Advanced Setup - Part 1 • If you are using a broadband router (DHCP function), there is no need to make the settings at "Setting the IP Address" and "Setting the Proxy", since the DHCP function is set to "ON" in the AVR-4806CI's default settings. • If the AVR-4806CI is being used connected to a network without the DHCP function, the network settings must be made. In this case, some knowledge of networks is required. Setting the IP Address • Set this when "OFF" is set for "DHCP". 1 Press the CURSOR D or H button to select "Network Setup" at the "System Setup Menu", then press the ENTER button. • The "Network Setup" screen appears. 2 Press the CURSOR D or H button to select "IP Address", then press the ENTER button. • The "IP Address" screen appears. Subnet Mask: When connecting an xDSL modem or terminal adapter directly to the AVR-4806CI, input the subnet mask indicated in the documentation supplied by your provider. Normally input 255.255.255.0. Gateway: When connected to a gateway (router), input its IP address. Primary DNS / Secondary DNS: If there is only one DNS address indicated in the documentation supplied by your provider, input it at "Primary DNS". If there are two or more DNS addresses, input the first one at "Second DNS". 5 Press the ENTER button to enter the setting. • The "IP Address" menu reappears. • DHCP (Dynamic Host Configuration Protocol): These are systems by which the IP address and other network settings are automatically set for the AVR-4806CI, computer, broadband router and network devices. • DNS (Domain Name System): This is a system for converting the domain names used when browsing Internet sites (for example, "www.denon.jp") into the IP addresses actually used for communications (for example, "202.221.192.106"). 3 Press the CURSOR F or G button to select "OFF". • The DHCP function is disabled. 4 Press the CURSOR D or H button to select the desired setting item, then press the CURSOR G button and CURSOR D or H button to input the address. IP Address: Set the IP address within the ranges shown below. The Network Audio function cannot be used if other IP addresses are set. CLASS A: 10.0.0.0 ~ 10.255.255.255 CLASS B: 172.16.0.0 ~ 172.31.255.255 CLASS C: 192.168.0.0 ~ 192.168.255.255 123

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
123
Advanced Setup – Part 1
Network Setup
• If you are using a broadband router (DHCP function), there is no need to make the settings at “Setting the IP Address” and
“Setting the Proxy”, since the DHCP function is set to “ON” in the AVR-4806CI’s default settings.
• If the AVR-4806CI is being used connected to a network without the DHCP function, the network settings must be made. In
this case, some knowledge of networks is required.
•
Set this when “OFF” is set for “DHCP”.
1
Press the
CURSOR
D
or
H
button to select
“Network Setup” at the “System Setup
Menu”, then press the
ENTER
button.
•
The “Network Setup” screen appears.
2
Press the
CURSOR
D
or
H
button to select “IP
Address”, then press the
ENTER
button.
•
The “IP Address” screen appears.
3
Press the
CURSOR
F
or
G
button to select
“OFF”.
•
The DHCP function is disabled.
Setting the IP Address
4
Press the
CURSOR
D
or
H
button to select the
desired setting item, then press the
CURSOR
G
button and
CURSOR
D
or
H
button to input
the address.
IP Address:
Set the IP address within the ranges shown below.
The Network Audio function cannot be used if
other IP addresses are set.
CLASS A: 10.0.0.0 ~ 10.255.255.255
CLASS B: 172.16.0.0 ~ 172.31.255.255
CLASS C: 192.168.0.0 ~ 192.168.255.255
Subnet Mask:
When connecting an xDSL modem or terminal
adapter directly to the AVR-4806CI, input the subnet
mask indicated in the documentation supplied by
your provider. Normally input 255.255.255.0.
Gateway:
When connected to a gateway (router), input its IP
address.
Primary DNS / Secondary DNS:
If there is only one DNS address indicated in the
documentation supplied by your provider, input it at
“Primary DNS”. If there are two or more DNS
addresses, input the first one at “Second DNS”.
5
Press the
ENTER
button to enter the setting.
•
The “IP Address” menu reappears.
•
DHCP (Dynamic Host Configuration Protocol):
These are systems by which the IP address and other
network settings are automatically set for the AVR-4806CI,
computer, broadband router and network devices.
•
DNS (Domain Name System):
This is a system for converting the domain names used
when
browsing
Internet
sites
(for
example,
“www.denon.jp”) into the IP addresses actually used for
communications (for example, “202.221.192.106”).