Denon AVR-4806CI Owners Manual - Page 39
Connecting the CONTROL terminals, Connecting the XM terminal - avr a v receiver
![]() |
UPC - 081757507295
View all Denon AVR-4806CI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Connecting the XM terminal Connecting Other Sources • AVR-4806CI is the XM Ready® receiver. You can receive XM® Satellite Radio by connecting to the XM Passport System (sold separately) and subscribing to the XM service. • Plug the XM Passport System into XM terminal on the rear panel. • Position the XM Passport System near a south-facing window to receive the best signal. For details, see "XM Satellite Radio" ( page 71, 72). When making connections, also refer to the operating instructions of the XM Passport System. XM Passport System MX NOTE: • Keep the power supply cord unplugged until the XM Passport System connection has been completed. • The XM name and related logo are registered trademarks of XM Satellite Radio Inc. All rights reserved. • XM Ready is a registered trademark of XM Satellite Radio Inc. All rights reserved. Connecting the CONTROL terminals These terminals are used for an external controller. Perform the following operation before using an external controller connected to the RS232C terminal: 1. Press the ON/STANDBY button on the main unit and set the unit to the operating mode. 2. Perform the operation to turn off the power from the external control. 3. Check that the product has been set to the standby mode. After checking the above, check the connections of the external controller. Operation is possible. 39
![](/manual_guide/products/denon-avr4806ci-owners-manual-a64919c/39.png)