Denon AVR-4806CI Owners Manual - Page 63
Surround Parameter, Cursor
![]() |
UPC - 081757507295
View all Denon AVR-4806CI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
¢ Surround parameters y EFFECT: This parameter turns the effect signals with multi surround mode speaker effects on and off in the WIDE SCREEN mode. When this parameter is turned off, the SBL and SBR channel signals are equivalent to the SL and SR channels, respectively. LEVEL: This parameter sets the strength of the effect signals in the WIDE SCREEN mode. It can be set in 15 steps, from "1" to "15". Set this to a low level if the positioning or phase of the surround signals sounds unnatural. SB CH OUT: • ON: Playback is conducted using the surround back speaker. • OFF: Playback is conducted without using the surround back speaker. NOTE: This operation can be performed directly pressing the SURROUND BACK button on the main unit's panel. ROOM SIZE: This sets the size of the sound field. There are five settings: "small", "med.s" (medium-small), "medium", "med.l" (medium-large) and "large". "small" recreates a small sound field, "large" a large sound field. EFFECT LEVEL: This sets the strength of the surround effect. The level can be set in 15 steps from 1 to 15. Lower the level if the sound seems distorted. DELAY TIME: In the matrix mode only, the delay time can be set within the range of 0 to 300 ms. Tone control setting Basic Operation • Use the tone control setting to adjust the bass and treble as desired. • The tone control function will not work in the PURE DIRECT, DIRECT or Home THX Cinema mode. ¢ Adjusting the tone 1 Press the SURROUND PARAMETER button. • Display the surround parameter menu. The screen selected surround mode appears. 2 Press the CURSOR D or H button to select "TONE". 3 Press the CURSOR F button. • Switch to the "Tone Control" screen. 4 Press the CURSOR G button to select "Tone Defeat OFF". 63
![](/manual_guide/products/denon-avr4806ci-owners-manual-a64919c/63.png)