Denon AVR-4806CI Owners Manual - Page 44

Basic Operation INPUT HOME THX FUNCTION MODE CINEMA VOLUME ROOM EQ INPUT MODE HOME THX CINEMA SOURCE PHONES EXT.IN ROOM EQ ANALOG MUTE FUNCTION VOLUME Playing the input source 1 Select the input source to be played. Example: CD (Main unit) (Remote control unit) To select the input source when ZONE2 SELECT, ZONE3/REC SELECT or TUNING PRESET is selected, press the SOURCE button on the main unit then operate the input function selector. 2 Start playback on the selected component. For operating instructions, refer to the component's manual. 3 Adjust the volume. The volume can be adjusted within the range of -80 to +18 dB, in steps of 0.5 dB. However, when the channel level is set ( page 64, 65 or 128 ~ 130), if the volume for any channel is set at +0.5 dB or greater, the volume cannot be adjusted up to 18 dB. (In this case the maximum volume adjustment range is "18 dB - (Maximum value of channel level)".) Also, you may not be able to adjust the volume to the maximum of 18 dB when internal volume compensation control is activated due to the combination of the surround mode and parameters, downmixing from multi-channel audio signals into two channels, etc. ¢ To choose the surround sound mode Example: HOME THX CINEMA Press the HOME THX CINEMA button. For more information about the surround modes ( page 50 ~ 53). (Main unit) (Remote control unit) M.VOL. -80.0dB The volume level is displayed on the master volume level display. ¢ To select the Room EQ function Press the ROOM EQ button. For more information about the Room EQ function ( page 48). 44