Denon AVR-4806CI Owners Manual - Page 50
Direct/stereo, Pure Direct
![]() |
UPC - 081757507295
View all Denon AVR-4806CI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Basic Operation HOME THX SURROUND CINEMA ENTER PARAMETER PURE DIRECT DIRECT/STEREO CURSOR HOME THX CINEMA PURE DIRECT ENTER SURROUND PARAMETER DIRECT/STEREO CURSOR ON SCREEN Playing audio sources (CDs and DVDs) 2-channel playback modes • The AVR-4806CI is equipped with three 2-channel playback modes exclusively for music. • Select the mode to suit your tastes. ¢ STEREO mode Use this mode to adjust the tone and achieve the desired sound. Press the DIRECT/STEREO button to select the STEREO mode. ¢ PURE DIRECT mode This mode reproduces the sound with extremely high quality. When this mode is set, all circuits and processes not required for the selected input source (FL tube, video circuit and tone control, as well as digital circuitry and other unnecessary circuits for analog audio inputs) are automatically turned off so the music signals can be reproduced with high sound quality. • The system setup function cannot be used when the PURE DIRECT mode is set. To use the system setup function, cancel the PURE DIRECT mode. • If the HDMI input terminal is selected, video outputs are outputted in the PURE DIRECT mode. • The channel level and surround parameters in the PURE DIRECT mode are the same as in the DIRECT mode. Press the PURE DIRECT button to select the PURE DIRECT mode. ¢ DIRECT mode Use this mode to achieve good quality 2-channel sound. In this mode, the audio signals bypass such circuits as the tone circuit and are transmitted directly, resulting in good quality sound. Press the DIRECT/STEREO button to select the DIRECT mode. The mode switches as shown below each time the DIRECT/STEREO button on the main unit is pressed. DIRECT STEREO When press SURROUND PARAMETER: The subwoofer output can be controlled directly. THX Surround EX / Home THX Cinema mode • When the HOME THX CINEMA button is pressed, the surround mode is set as follows according to the signal that is played: q THX Surround EX (THX Ultra2 Cinema) w Home THX CINEMA (PLIIx C + THX) e THX 5.1 r ES DSCRT 6.1 +THX, ES MTRX 6.1 + THX When the HOME THX CINEMA mode is set when a DVD is played, check the DVD player's digital output setting and change the setting to one for which Dolby Digital and DTS bit stream signals can be output ("bit stream", for example). 50
![](/manual_guide/products/denon-avr4806ci-owners-manual-a64919c/50.png)