Denon AVR-4806CI Owners Manual - Page 88

Advanced Operation SYSTEM CALL CHANNEL IR segment MODE SELECTOR Resetting ¢ Resetting the single learned button 1 Press and hold the RC SETUP button for at least three seconds. • The IR segment blinks twice. 2 Press the 9, 7, 6 button (9 → 7 → 6). • The IR segment blinks twice. 3 Press the MODE SELECTOR button. NUMBER RC SETUP 4 Press the learned button you want to reset twice. • The IR segment blinks twice. Other key can be deleted by repeating steps 1 to 4. ¢ Resetting the learned buttons Setting the brightness • The brightness of the display can be adjusted in 5 levels. • The default brightness setting is level 3 (level 5 = brightest). 1 Press and hold the RC SETUP button for at least three seconds. • The IR segment blinks twice. 2 For 1 brightness step increase: Press the CHANNEL + button. -1 2 For 1 brightness step increase: Press the CHANNEL - button. -2 3 Press and hold the RC SETUP button to exit programming. • The IR segment twice as confirmation. 1 Press and hold the RC SETUP button for at least three seconds. • The IR segment blinks twice. 2 Press the 9, 7, 6 button (9 → 7 → 6). • The IR segment blinks twice. 3 Press the MODE SELECTOR button you want to reset twice. • The IR segment blinks twice. ¢ Resetting the system call buttons 1 Press and hold the RC SETUP button for at least three seconds. • The IR segment blinks twice. 2 Press the 9, 7, 8 button (9 → 7 → 8). • The IR segment blinks twice. 3 Press the SYSTEM CALL button (1 to 3) you want to reset. 4 Press and hold the RC SETUP button for at least three seconds to clear the system call. • The IR segment blinks twice. 88