Denon AVR-4806CI Owners Manual - Page 59
Surround Parameter, Cursor, Enter
![]() |
UPC - 081757507295
View all Denon AVR-4806CI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
¢ Surround parameters t DTS NEO:6 Mode: • Cinema: This mode is optimum for playing movies. Decoding is performed with emphasis on separation performance to achieve the same atmosphere with 2-channel sources as with 6.1-channel sources. This mode is effective for playing sources recorded in conventional surround formats as well, because the in-phase component is assigned mainly to the center channel (C) and the reversed phase component to the surround (SL, SR and SB channels). • Music: This mode is suited mainly for playing music. The front channel (FL and FR) signals bypass the decoder and are played directly so there is no loss of sound quality, and the effect of the surround signals output from the center (C) and surround (SL, SR and SB) channels add a natural sense of expansion to the sound field. CENTER IMAGE (0.0 to 1.0: default 0.3): The center image parameter for adjusting the expansion of the center channel in the DTS NEO:6 MUSIC mode has been added. The Dolby Headphone • The Dolby Headphone mode is set when headphones are connected to the PHONES jack while in the DOLBY/DTS SURROUND mode. 1 Press the SURROUND PARAMETER button. • Display the "Surround Parameter" menu. ¢ Parameters Basic Operation MODE: • DH1: Reference room (small room with weak reverberations). • DH2: Live room (room with a bit stronger reverberations than DH1). • DH3: Large room (larger room than DH1, offers a sense of distance and sound diffusion effects). • BYPASS: Stereo sound. DECODER: Select this when playing analog, PCM or other 2-channel sources. The signals are converted into multichannel signals using the decoders shown below and played in the Dolby Headphone mode. • PLII C: Dolby Pro Logic II Cinema mode. • PLII M Dolby Pro Logic II Music mode. • NEO:6 C: DTS NEO:6 Cinema mode. • NEO:6 M: DTS NEO:6 Music mode. • OFF: The signals are played in the Dolby Headphone mode as such (2 channels). - Recording - When RECOUT mode is set to "SOURCE", with this amplifier signals encoded in the Dolby Headphone mode can be output from the recording output terminals and recorded on another recorder ( page 95). 2 Press the CURSOR D or H button to select the parameter. 3 Press the CURSOR F or G button to select the setting. 4 Press the ENTER or SURROUND PARAMETER button to complete the setting. 59
![](/manual_guide/products/denon-avr4806ci-owners-manual-a64919c/59.png)