Denon DCM-5001 Serial Protocol - Page 14
Request Setting Disc
View all Denon DCM-5001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
.4 Request Setting Disc This acquires the disc number installed in the disc rack. bytebit 7 6 5 4 3 2 1 0 0 STX 02h 1 Command code 6 2 ETX 03h 3 BCCH high-level 4 BCCL low-level Answers returned bytebit 7 6 5 4 3 2 1 0 0 STX 02h 1 Reply code 6 2 Answer code 3 First disc number ( 100 digits ) 4 First disc number ( 10 digits ) 5 First disc number ( 1 digit ) 6 Second disc number ( 100 digits ) N: MAX 100 ( n-1 ) th disc number ( 1 digit ) n th disc number ( 100 digits ) n th disc number ( 10 digits ) n th disc number ( 1 digits ) ETX 03h or ETB 17h BCCH high-level BCCL low-level Special conditions · This command shall only be issued after checking the Disc Sense Complete status(3) with a status code to the Request System Status command ( ' 0 ' ). · After detecting the discs, If there is no disc in the unit,it will be sent the Disc Nothing Status ( ' 5 ' ) instead of the Disc Sense Complete Status (3).In this case it's not necessary to send this command · The maximum value of N is 100. · Because its length of parameters for the answers is flexible depending on the numbers of discs in the unit, it can be sent the answer by dividing into a couple of numbers with adding ETB (17h) to the end of each data and 03h to the final data. Other