Denon DCM-5001 Serial Protocol - Page 28
Request Track Data
View all Denon DCM-5001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
.18 Request Track Data This requests track data from the disc. bytebit 7 6 5 4 3 2 1 0 0 STX 02h 1 Command code 2 2 Zone specification (*1) 3 Track number specification ( 10 digits ) 4 Track number specification ( 1 digit ) 5 ETX03h 6 BCCH high-level 7 BCCL low-level (*1) Zone specification Code 31h1 32h2 Single zone Current zone Next zone Function Dual zone Zone 1 Zone 2 Answers returned bytebit 7 6 5 4 3 2 1 0 0 STX 02h 1 Reply code 2 2 Answer code 3 Specified track number ( 10 digits ) 4 Specified track number ( 1 digits ) 5 Absolute starting time ( minutes10 digits ) 6 Absolute starting time ( minutes1 digit ) 7 Absolute starting time ( second10 digits ) 8 Absolute starting time ( second1 digit ) 9 Absolute starting time ( frame10 digits ) 10 Absolute starting time ( frame1 digit ) 11 ETX 03h 12 BCCH high-level 13 BCCL low-level Special conditions · If this command is issued when no disc is mounted on the drive in a selected zone or when TOC read is incomplete, all tracks and time parameters(byte 310) of the answer will be 0 ( 30h ). · This command is valid only when the zone status is TOC Read (E) or Load CD-TEXT Disc (J), or when the previous zone status is proceeded to other status by the Request System Status command or other commands see item 3 of "1.8 List of Status Codes". Other