Denon DCM-5001 Serial Protocol - Page 29
Request CD-TEXT Name
View all Denon DCM-5001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
.19 Request CD-TEXT Name This requests the various titles of a specified CD-TEXT disc. bytebit 7 6 5 4 3 2 1 0 0 STX 02h 1 Command code 4 2 Disc number ( 100 digits ) 3 Disc number ( 10 digits ) 4 Disc number ( 1 digit ) 5 Name category code 1 *1 6 Name category code2 *1 7 ETX 03h 8 BCCH high-level 9 BCCH low-level *1 Name category code Name category Disc Artist Track Name category code 1 ' D ' ' A ' Track number 10 digits ( ASCII ) Name category code 2 ' I ' ' R ' Track number 1 digits ( ASCII ) Answers returned bytebit 7 6 5 4 3 2 1 0 0 STX 02h 1 Reply code 4 2 Answer code 3 Name character 1 (ASCII) n2 Name character nASCII n3 ETX 03h n4 BCCH high-level n5 BCCH low-level Special condition · The answer parameter for this command shall be of a variable length ( as per the data length of the CD-TEXT ). However, the maximum value of the 'n' in the table ( maximum number of characters ) shall be 100. The number of track titles shall be max. 16. · This command is valid only when the zone status is Load CD-TEXT Disc (J), or when the previous zone status is proceeded to other status by the Request System Status command or other commands see item 3 of "1.8 List of Status Codes". However, a specified disc must be in the CD drive. · For the order of the Request CD-TEXT Name and the Request TOC Data commands, it is recommended to issue the Request TOC Data first. · Other