Denon DCM-5001 Serial Protocol - Page 22
A-Time Absolute Time Search
View all Denon DCM-5001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
.12 A-Time (Absolute Time) Search This conducts an absolute time search on the disc in a selected zone. If the unit receives this command while in the playback or pause mode, the unit completes the search, then keeps running according to its immediately previous state. If the unit receives this command at the stop mode, it enters the play mode from a track specified with A-Time. The unit becomes the pause mode at the end of a track specified with A-Time. bytebit 7 6 5 4 3 2 1 0 0 STX 02h 1 Command code W 2 Absolute time specification ( minutes10 digits ) 3 Absolute time specification minutes1 digit 4 Absolute time specification seconds10 digits 5 Absolute time specification seconds1 digit 6 Absolute time specification frames10 digits 7 Absolute time specification frames1 digit 8 ETX 03h 9 BCCH high-level 10 BCCL low-level Answers returned bytebit 7 6 5 4 3 2 1 0 0 STX 02h 1 Reply code W 2 Answer code 3 ETX 03h 4 BCCH high-level 5 BCCL low-level Special conditions · The current track, next disc, and next track specified with the PLAY command are canceled. It should send the command after this command to reserve the next disc or the track. · This command is valid only when the zone status is Stop (B), Play (F) or PAUSE (G). Other