Denon DCM-5001 Serial Protocol - Page 21
Scan Play
View all Denon DCM-5001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
.11 Scan Play This scans and plays the disc in a selected zone. bytebit 7 6 5 4 3 2 1 0 0 STX 02h 1 Command code V 2 Skip code Forward Reverse 3 ETX 03h 4 BCCH high-level 5 BCCL low-level Answers returned bytebit 7 6 5 4 3 2 1 0 0 STX 02h 1 Reply code V 2 Answer code 3 ETX 03h 4 BCCH high-level 5 BCCL low-level Special conditions · SCAN PLAY can be canceled with the PLAY command by setting 2 to 11 bytes of the PLAY command to '0'. · This command is valid only when the zone status is Play (F) or PAUSE (G). · When Read-in or Read-out is set by this command, the disc pauses at the top of the minimum track (in the Read-in status) or pauses about two seconds before the read-out start time (in the Read-out status). · When the current and next disc numbers which were specified by the Play Command are the same, the next disc and the next track that were specified by the Play Command are canceled with this command. Other