Denon DN S5000 Quick Start Guide - Page 11

ENGLISH @7 DISPLAY MAIN/a (Alpha), TITLE button • DISPLAY MAIN/a (Alpha): A quick push will display changes between MAIN display and a TRACK display. • TITLE: When there is CD text data, the CD text data is displayed when the button is pressed for more than 1 second. The display returns to normal after the CD text data is displayed. @8 CONT./SINGLE, RELAY button • CONT./SINGLE: Short pushing play ending mode between CONT (continue: play more tracks) and SINGLE (stop playing at current track played). • RELAY: You can turn on and off RELAY PLAY mode. Relay playback is possible when two DNS5000s are connected by X-EFFECT. @9 TIME, T.TIME button • TIME: A quick push will display mode changes between ELAPSED TIME and REMAIN TIME. • T.TIME: A long push, will display mode changes between TRACK TIME and DISC TIME. • So, you can select display mode from four modes, TRACK ELAPSED, TRACK REMAIN, DISC ELAPSED and DISC REMAIN. #0 MEMO, PRESET (/ PROGRAM/RANDOM) button • MEMO: The memo mode starts when this button is pushed once in the Cue mode. • PRESET: When this button is pushed for more than 1 sec, the PRESET mode starts. • PROGRAM: When the Preset mode is selected, with a short push, you can make list of program play and turn on/off Program play mode using PARAMETERS knob. • RANDOM: When the Program mode is selected, with a short push, Random play mode can be turned on/off with PARAMETERS knob. #1 FAST SEARCH knob (6 7) • Fast-forward playback is selected when moved to the 7 side, fast-reverse playback is selected when moved to the 6 side. #2 a (Alpha) MODE, MIRROR MIX button • a (Alpha) MODE: Use this to turn the Alpha-Mode on and off. The Alpha-Mode playback sound is outputted from the ALPHA OUT jacks in the AlphaMode. • MIRROR MIX: The Mirror Mix mode is selected when this button is pressed and held in for more than 1 second.When the button is pressed and held in for more than 1 second, the Mirror Mix mode is turned off. In the Mirror Mix mode, the Alpha-Track is played with a delay of the specified beat or time after the Main Track. #3 a (Alpha) CUE/SAMP. STOP button • a (Alpha) CUE: Use this as CUE and STUTTER button in Alpha-Track. This button lights up when the Alpha-CUE point is set. • SAMP. STOP: Push while Sampler playback, Sampler playback stops. #4 TRACK/PARAMETERS knob • TRACK: When PARAMETERS LED is on, turn this knob to select tracks. By pushing this knob down while turning, the tracks will change 10 at a time. • PARAMETERS: When the PARAMETER LED is flashing, turn this knob to select and change the parameter for items found in the Platter effects, Program, Memo, and Preset data, etc. #5 a (Alpha) track Play/Pause button (13) • When this button is pushed while in the Cue or Pause mode, the Alpha-Track playback starts. By pushing it once again will Pause the Alpha-Track. • It is necessary to make Cue point for the Alpha-Track before starting Alpha-Track playback. #6 a (Alpha) PITCH BEND - button #7 a (Alpha) PITCH BEND + button • Pushing these buttons will change Alpha-Track playing speed temporary. • While pushing a (Alpha) PITCH BEND + button playing speed increases and speed decreases while pushing a (Alpha) PITCH BEND - button. • When release button, playing speed returns to the previous speed. • a (Alpha) CUE-CLR: If the a (Alpha) CUE button is pushed while pushing the a (Alpha) PITCH BEND - button, the Alpha-Cue point is cleared. #8 TAP, LOCK, AUTO/INPUT BPM button • TAP: When you push this button repeatedly, the Auto mode turns off and starts measuring your Beats Per Minute (BPM) by tapping. • LOCK: When this button is pressed once while the auto BPM counter is operating, the data measured by the auto BPM counter is locked. • AUTO: When pushing the TAP button for 1 second, activates AUTO BPM mode. The measured BPM is displayed in the character section of the display. • INPUT BPM : When the TAP button is pressed and held in for more than 2 seconds, the BPM input mode is set and the BPM value can be input directly with the PARAMETERS knob. When the button is pressed again, the BPM input mode is turned off. NOTE: If you select a new track, AUTO BPM mode turns on automatically. #9 PITCH BEND - button $0 PITCH BEND + button • Pushing these buttons will change main playing speed temporary. • While pushing PITCH BEND + button playing speed increases and speed decreases while pushing PITCH BEND - button. • When release button, playing speed returns to the previous speed. $1 Pitch Slider • Use this slider to adjust playing speed. • The playing speed decreases when slide upwards and increases downwards. $2 PITCH/KEY, RANGE button • With this button you can select PITCH and KEY ADJUST mode. Mode changes Pitch on, Key Adjust on and both off cyclically. PITCH LED indicates in Pitch mode and KEY ADJUST indicator lights up in Key Adjust mode. • RANGE: Push this button for more than 1 sec to select the pitch range. $3 DUMP/RVS, SOURCE button • DUMP/RVS: Push this button a short time to select the effect function from RVS and DUMP. • SOURCE: When this button is pressed and held in for more than 1 second, the source for which the Platter effect function is to be used (Main, Alpha-Track or Main and Alpha-Track) can be selected with the PARAMETERS knob. $4 BRAKE/ECHO, TIME button • BRAKE/ECHO: Push this button a short time to select the effect function from BRAKE and ECHO. • TIME: If pushed for more than 1 sec, you can select time for BRAKE or ECHO with PARAMETERS. $5 DRAG-S, TIME button • DRAG-S: Push this button a short time to set the DRAGS. • TIME: If pushed for more than 1 sec, you can select time for DRAG-S with PARAMETERS. 9