Denon DN S5000 Quick Start Guide - Page 16

ENGLISH Mirror Mix • The Alpha-Track can be played with a delay of the specified beat or time after the Main Track. w, e, y q r, t Set BPM q The BPM for Main Track 1 playback can be set with either the AUTO BPM counter, TAP button or BPM INPUT button. LOCK AUTO / INPUT BPM Enter Mirror Mix mode w The Mirror Mix mode is set 2 when the MIRROR MIX button is pressed and held in for more than 1 second. MIRROR MIX Set the Mirror Mix parameter MIRROR MIX e When the MIRROR MIX button is pressed again (short press), the delay beat 3 time can be set with the PARAMETERS knob. • When the Mirror Mix mode is set during playback, Alpha-Track playback is paused. 14 Start Mirror Mix playback r When the 13 button is pressed while the Main Track is paused or in the 4 standby mode, Mirror Mixing starts. • When the a 13 button is pressed while the Main Track is playing, Mirror Mixing resumes. Pause Mirror Mix playback t When the 13 button is pressed during Mirror Mixing, Mirror Mixing pauses. 5 • The 13 button flashes. When the a 13 button is pressed during Mirror Mixing, playback of the Alpha-Track only pauses. • The a 13 button flashes. Cancel Mirror Mix mode y The Mirror Mixing mode is 6 turned off when the MIRROR MIX button is pressed and held in for more than 1 second. MIRROR MIX Alpha Track Hot Disc • The disc can be ejected while still Alpha-Track playing. Data loading When the !0 DISC EJECT button is pressed and held in for more than 1 second while the Alpha- Track is playing, playback continues and the subsequent HOT DISC data is read for a maximum of 35 seconds. (at 0% pitch) 1 • If a Seamless Loop of within 35 seconds is playing, loop playback continues. NOTE: The Hot Disc function cannot be used when both the Main Track and AlphaTrack are playing. When the Hot Disc function is started, the Sampler data and points A and B aside from the points for the currently playing loop are cleared. Eject 2 Once data loading is completed, the disc is ejected. Disc loading and Cue search Load a new disc. • Operate as usual, and cue to the beginning of a track or match the beat. • When at this time the Alpha-Track signals are being output from the MAIN OUT terminals, the disc's playback signals are 3 output from the ALPHA OUT terminals, and when the Alpha-Track signals are being output from the ALPHA OUT terminals, the disc's playback signals are output from the MAIN OUT terminals. • The a MODE button flashes when the disc's playback signals are being output from the ALPHA OUT terminals. Change output Once cueing is completed, stop playback, and when the #2 a MODE button is pressed while MIRROR MIX 4 it is flashing, output of the disc's playback signals switches from the MONITOR OUT to the MAIN OUT terminals. • Start playback from the disc and stop Hot Disc playback. Hot Disc clear When the #3 a CUE button is pressed while pressing the #6 a PITCH BEND - button, the Hot Disc mode is turned off and the player is set back to the normal mode. 5 SAMP. STOP PITCH BEND NOTE: The a MODE button does not function before the Hot Disc data is cleared.