Denon DN S5000 Quick Start Guide - Page 26

ENGLISH 15 PROGRAM/RANDOM/RELAY PLAY/POWER ON PLAY Program play • Up to 25 tracks from one disc can be programmed. • Programs for up to six discs (one program per disc) can be stored in the non-volatile memory for later recall. NOTE: Such functions as Hot Start, Sampler, Mirror Mix, and Platter Effect do not operate during programmed playback. q, e #3 w, r, t, y #2 #1 Program mode select q In the Cue or pause mode, push the PRESET MEMO button for more than 1 sec to select preset PRESET mode. When the PRESET button is pressed at this time, the program mode is selected. ✽ The mode switches in the following order each time the PRESET button is pressed (short press): preset mode → program mode → random mode → off. 1 w Turn the PARAMETERS PUSH PARAMETERS knob to ON/OFF select the various program setting modes as follows. Prog.In, Prog.On, Prog.Off, MemoSet, MemoCall, Memo Clr Depending on conditions, some modes cannot be selected. e Push the PRESET button again to exit program mode. MEMO PRESET Input Program (Prog.In) Input the program for program playback. r Turn the PARAMETERS knob to select the track. PARAMETERS PUSH ON / OFF t Push the 2-1 PARAMETERS knob PARAMETERS PUSH ON / OFF to input the selected track to the program. #1 Insert Tracks to Program • You can insert tracks to the previously programmed tracks. • One track can be inserted at a time using the PITCH BEND + button and return r. #2 Clear Tracks from Program • You can clear tracks from the previously 2-2 programmed tracks. • One track can be cleared at a time using the PITCH BEND - button. y Push the PARAMETERS knob again to return step 2-1 - r. PARAMETERS PUSH ON / OFF 3 • Repeat these steps to input whole program. • Push the PRESET button to end the program input mode, then proceed to Start Program Play (Prog.On). Start Program Play (Prog.On) • When "Prog.On" is selected, DN-S5000 will cue up at the first track in the program. 4 • Program playback starts when the 13 button is pushed. #3 You can use program repeat play function with push EXIT/RELOOP button. Cancel Program mode (Prog.Off) 5 • When "Prog.Off" is selected, the program play mode turns off and returns to normal play mode. Store Program (MemoSet) 6 • When "Memo Set" is selected, the program that has been set is stored in the non-volatile memory. Call Program (MemoCall) 7 • When "MemoCall" is selected, the program stored in the non-volatile memory is loaded and the program play mode is set. Clear Program (Memo Clr) • When "Memo Clr" is selected, the program 8 for the loaded disc is cleared. • To clear all Program Memo use Preset function. 24