Denon DN S5000 Quick Start Guide - Page 14

ENGLISH Main Hot Disc • The disc can be ejected while still Main Track playing. Data loading When the !0 DISC EJECT button is pressed for more than 1 second and held in while the HOT DISC Main Track is playing, up to 35 seconds of subsequent data can be read. (at 0% pitch) 1 • If a Seamless Loop of within 35 seconds is playing, loop playback continues. NOTE: The Hot Disc function cannot be used when both the Main Track and AlphaTrack are playing. When the Hot Disc function is started, the Sampler data and points A and B aside from the points for the currently playing loop are cleared. Eject • Once data loading is completed, the disc is ejected. 2 • The operating buttons switch to the Alpha- Track controls. (13 → a 13, CUE → a CUE, A1 → A3, A2 → A4, and Loop control buttons.) Disc loading and Cue search • Load a new disc. 3 • Operate as usual, and cue to the beginning of a track or match the beat. At this time, the disc's playback signals are output from the ALPHA OUTPUT terminals. Change output Once cueing is completed, stop MIRROR MIX playback, and when the #2 a MODE button is pressed output 4 of the disc's playback signals switches from the ALPHA OUT to the MAIN OUT terminals. • Start playback from the disc and stop Hot Disc playback. Hot Disc clear When the #3 a CUE button is pressed while pressing the #6 a PITCH BEND - button, the Hot Disc mode is turned off and the player is set back to the normal mode. 5 SAMP. STOP PITCH BEND NOTE: The a MODE button does not function before the Hot Disc data is cleared. 6 SCRATCH You can Scratch in CD or Sampler mode. Also you can select the Scratch sound direction to (turn direction of Scratch Disc), both and forward. These selections give you variety of Scratch effects. w q e Select Scratch source q Select the source to be TRACK SAMP. MAIN SEARCH scratched using the SCRATCH source select knob. 1 • If scratching is possible, the LED for the selected source flashes. • If scratching is not possible immediately, because for example the Sampler or Alpha-Track settings have not been made, the LED for the selected source lights without flashing. Select Scratch direction w Select the direction for 2 scratching using the FWD SCRATCH direction select BOTH knob. [Scratch Disc] e When MAIN is selected as the Scratch mode and Scratch Disc is turned by hand, the Main Track is 3 scratched. When Alpha-Track is selected as the Scratch mode and Scratch Disc is turned by hand, the Alpha-Track is scratched. When SAMPLER is selected as the Scratch mode and Scratch Disc is turned by hand, the sample is scratched. 12