Denon DN S5000 Quick Start Guide - Page 9

ENGLISH 2 CONNECTIONS/INSTALLATION 1. Turn off the POWER switch. 2. Connect the RCA pin cords between the DN-S5000 outputs and inputs of your mixer. Be sure MAIN OUTs are Main outputs and ALPHA OUTs are outputs of Alpha-Track sound. 3. If your mixer has Fader Start function such as our DENON DN-X800 or DN-X400, connect FADER 1, 2 jacks to the mixer using 3.5 mm stereo mini cord. 4. If you have a DENON DN-X800 mixer, you can use the X-Effect function to control the Hot Starts, Samplers and Brake from the crossfader to get wide variety of operation. You may also trigger the Alpha Track by connecting Fader Start 1, 2 to the DN-X800 mixer using the 3.5 mm stereo mini cords. Fig. 1 : Fader start connections example 1 Fig. 2 : X-Effect connections example 1 FADE FADE CH1 CH2 CH3 CH4 Rch1 Rch2 DN-X400 FADE FADE CH1 CH2 CH3 CH4 Rch3 Rch4 X'EFFECT DN-X800 FADER FADER MAIN ALPHA MAIN ALPHA DN-S5000 RCA cord 3.5 mm stereo mini cord FADER FADER MAIN ALPHA MAIN ALPHA DN-S5000 X'EFFECT X'EFFECT IN OUT X'EFFECT X'EFFECT IN OUT • Fader start playback is possible with the Main and Alpha-Tracks. Fig. 1 : Fader start connections example 2 • X-EFFECT playback is possible with the Main and Alpha-Tracks. Fig. 2 : X-Effect connections example 2 FADE FADE CH1 CH2 CH3 CH4 Rch1 Rch2 DN-X400 FADE FADE CH1 CH2 CH3 CH4 Rch3 Rch4 X'EFFECT DN-X800 3 PART NAMES AND FUNCTIONS (1) Front panel (2) Rear panel q Disc loading slot • Load the CD. Load the disc slowly, and release it once the DN-S5000 starts drawing the disc in. CAUTIONS: • Do not load discs when the power is turned off. • Do not try to forcibly remove a disc once the DN-S5000 has started to draw it in. • Do not load more than once disc at a time or insert anything other than discs. Otherwise loading mechanism may be damaged. w CD drive • This Drive is field replaceable by you. • Optional spare drive is sold separately. e POWER button (¢ON £OFF) • Push this button to turn power on and off. CAUTION: • Do not turn off the power while a disc is loading or being ejected. Otherwise loading mechanism may be damaged. r X-EFFECT jacks (X-EFFECT IN/OUT) • Connect this jack to the DENON mixer DNX800 and DN-S5000 with 3.5 mm stereo mini cord. t Alpha analog output jacks (LINE OUT ALPHA) • These are unbalanced RCA output jacks. • Alpha-Track audio signals are output. y Main analog output jacks (LINE OUT MAIN) • These are unbalanced RCA output jacks. • Main audio signals outputs. u Fader start jacks (FADER MAIN, ALPHA) • Use these when your mixer has Fader Start function with 3.5 mm stereo mini cord. i Digital output jacks (DIGITAL OUT MAIN, ALPHA) • Main/Alpha Digital data is output from these jacks. • Use 75 Ω/ohms pin cord for connections. • We recommend you use braided wire type shielded cables. FADER FADER FADER FADER MAIN ALPHA MAIN ALPHA MAIN ALPHA MAIN ALPHA DN-S5000 CD1 X'EFFECT X'EFFECT IN OUT DN-S5000 CD2 X'EFFECT X'EFFECT IN OUT FADER FADER FADER FADER MAIN ALPHA MAIN ALPHA MAIN ALPHA MAIN ALPHA DN-S5000 CD1 X'EFFECT X'EFFECT IN OUT DN-S5000 CD2 X'EFFECT X'EFFECT IN OUT • Fader start playback is possible with the CD 1 Main • X-EFFECT playback is possible with the CD 1 Main Track and CD 2 Main Track. Track and CD 2 Main Track. • The memos of CD1 and CD2 can be compared • The memos of CD1 and CD2 can be compared when the CD players are connected by X-EFFECT. when the CD players are connected by X-EFFECT. • Relay play • Fader start playback is possible with the Alpha- Tracks of CD1 and CD2. • Relay play 7