Dewalt DW08802CG Instruction Manual - Page 7

Contents • Laser Information • User Safety • Battery Safety • Powering the Laser • Turning the Laser On • Checking Laser Accuracy • Using the Laser • Maintenance • Troubleshooting • Service and Repairs • Specifications Laser Information The DW08802 and DW08802CG Cubix lasers are Class 2 laser products. The lasers are self-leveling laser tools that can be used for horizontal (level) and vertical (plumb) alignment projects. WARNING: Read and understand all instructions. Failure to E follow the warnings and instructions in this manual may result in serious personal injury. SAVE THESE INSTRUCTIONS WARNING: Laser Radiation Exposure. Do not disassemble or modify the laser level. There are no user serviceable parts inside. Serious eye injury could result. WARNING: Hazardous Radiation. Use of controls or adjustments, or performance of procedures, other than those specified herein may result in hazardous radiation exposure. The label on your laser may include the following symbols. Symbol V Meaning Volts User Safety mW Milliwatts Laser Warning Safety Guidelines nm Wavelength in nanometers The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.  WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage. If you have any questions or comments about this or any DEWALT® tool, go to http://www.DEWALT.com. 2 Class 2 Laser Warning Labels For your convenience and safety, the following labels are on your laser.  WARNING: To reduce the risk of injury, user must read instruction manual.  WARNING: LASER RADIATION. DO NOT STARE INTO BEAM. Class 2 Laser Product. TYPE 1 3V DC DW08802 MADE IN CHINA LASER 2 ≤1.5mW @630-680nm IEC 60825-1: 2014 Complies with 21 CFR 1040,10 and 1040,11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 www. DEWALT.com TYPE 1 3V DC DW08802CG MADE IN CHINA LASER 2 ≤1.5mW @510-530nm IEC 60825-1: 2014 Complies with 21 CFR 1040,10 and 1040,11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 www. DEWALT.com • Do not operate the laser in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. This tool may create sparks which may ignite the dust or fumes. SER.________ SER.________ 7