Electrolux E42BS75ETT Owners Manual - Page 28
Remove, Packaging
![]() |
View all Electrolux E42BS75ETT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Installation Instructions [] REMOVE PACKAGING CAUTION: Refrigerator is Top-Heavy--be careful when moving. When using an appliance dolly, handle from Freezer side only. • Carefully cut banding at the top and bottom; remove outer carton. • Slide out rear corner posts (2). • Slide carton off top of cabinet. NOTE: DO NOT LAY CABINET DOWN IN ORDER TO REMOVE SKID! • The unit is secured to the skid with six 7/16" bolts and six 1/2" nuts. • Remove all six 7/16" bolts that secure metal brackets to the refrigerator, • Remove the three 1/2" nuts and washers from the Freezer side. • Remove nut from rear wood block on Freezer side. • Tilt unit up on Freezer side toward Fresh Food side, • Push bolts down, remove metal bracket from Freezer side. Remove wood block from Freezer side, • Slide the appliance dolly underneath the Freezer side. • Using corner posts (2 on front corners) to prevent damage, secure unit to appliance dolly. NOTE: If corner posts are too long, cut the posts to a shorter length. Toekick Taped to Topor Unit o3_ 1/2" Nut • Lift the unit off the skid with the appliance dolly. • Remove toekick taped to the top of the unit, • Set toekick aside for final installation. CAUTION: DO NOT ATTEMPT TO ROLL OR DRAG UNTIL UNIT IS OFF SKID. CAUTION: MAKE SURE THE WATER LINE IS CLEAR OF APPLIANCE DOLLY TO AVOID DAMAGE. 28
![](/manual_guide/products/electrolux-e42bs75ett-owners-manual-a859918/28.png)