Electrolux E42BS75ETT Owners Manual - Page 38

Troubleshootingtips... Troubleshooting lips Save time and money! Review the charts on the following pages first and you may not need to call for service. Elec ol,xUSA.com Refrigeratordees not operate Vibration or rattling (slight vibration is normal) Motor operates for long periods or cycles on and off frequently. (Modemrefrigerators withmorestorage space and a larger freezer require more operating time. They Mart and stop often to maintain even temperatures.) Refrigeratoor rfreezer compartment too warm Frost or ice crystals onfrozenfood (frostwithin package is normal) Divider between refrigerator and freezer compartments feels warm Automaticicemaker doesnot work 38 Possible Causes Refrigerator in defrost cycle. Master power control set to OFF. Refrigerator is unplugged. The fuse is blown/circuit breaker is tripped. The refrigerator is in showroom mode. What To Do • Wait about 30 minutes for defrost • Set the control to an on setting. cycle to end, • Push the plug completely into the outlet, • Replace fuse or reset the breaker, • Unplug the refrigerator and plug it back in, Refrigerator is not level. • See Level reRigerator • See Door alignment. Normal wben refrigerator is first plugged in. Often occurs when large amounts of food are placed in refrigerator. Door left open. Hot weather or frequent door openings. Temperature controls set at tire coldest setting. Temperature cold enougb. control not set Warm weather or frequent door openings. Door left open. Door left open. Too frequent or too long door openings. Automatic energy saver system circulates warm liquid around front edge of freezer compartment. Icemaker power switch is in tire off position. Water supply turned off or not connected. Freezer compartment too warm. Piled up cubes in the storage bin cause the icemaker to shut off. Ice cubes stuck in icemaker. (Green power light on icemaker blinking). • Wait 24 houI_ for the refrigerator cool down, • This is normal. to completely • Check to see if package is holdh_g door open. • This is normal. • SeeAbout the temperaturecontrols, • See About the temperaturecontrols, • Set the teini)erature control one step colder. See About the temperature controls, • Check to see if package is holdMg door open. • Check to see if package is holdMg door open. • This helps prevent condensation on the outside, • Set the power switch to the oil position. • See Install water line, • Wait 24 hours for the refligerator cool clown, • Level cubes by hand. to completely • Tun_ off the iceinakei; reinove cubes and turn the iceinaker back on.